Axis, 2025

Foil Drive Pocket Trench 2025

1700mm long · 5'7"

512mm wide

≈ 108mm thick · estimated

60litres

Open in Studio See it on axisfoils.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

A finer nose than most. A round tail, a medium nose and gently curved rails.

derived · against the 77 other surf foil boards in the atlas, read off the outlines.

As listed by Axis

Axis Foil Drive Pocket Trench 2025: every size as listed by Axis
size	length	width	thickness	weight
40 L	1500mm · 1500 mm	480 mm	≈ 87 mm · estimated	–
50 L	160 cm · 1600 mm	492 mm	≈ 99 mm · estimated	–
60 L	170 cm · 1700 mm	512 mm	≈ 108 mm · estimated	–

Every size side by side, tails on one line, one scale

Next to your board?

Lay the Axis Foil Drive Pocket Trench 60 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 40 L outline · derived

52 %wide point, 774 mm from the tail

3.21length over width

374mm wide 12″ from the tail

5,583cm² of planform

Read off the 50 L outline · derived

52 %wide point, 833 mm from the tail

3.32length over width

379mm wide 12″ from the tail

6,140cm² of planform

Read off the 60 L outline · derived

52 %wide point, 885 mm from the tail

3.34length over width

392mm wide 12″ from the tail

6,910cm² of planform

Rocker of the 40 L · scaled from the 60 L, borrowed (≈), estimated

≈ 34 mmtail rocker, at the tip

≈ 7 mm12″ from the tail

≈ 18 mm12″ from the nose

≈ 87 mmnose rocker, at the tip

≈ 504 mmflat to within 3 mm, from 30 % to 64 % of the length

48 %of the length to the lowest point, from the tail

≈ 87 mmat its thickest, 51 % from the tail

≈ 24 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 50 L · scaled from the 60 L, borrowed (≈), estimated

≈ 36 mmtail rocker, at the tip

≈ 8 mm12″ from the tail

≈ 21 mm12″ from the nose

≈ 93 mmnose rocker, at the tip

≈ 518 mmflat to within 3 mm, from 31 % to 63 % of the length

48 %of the length to the lowest point, from the tail

≈ 99 mmat its thickest, 51 % from the tail

≈ 25 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 60 L · borrowed (≈), estimated

≈ 39 mmtail rocker, at the tip

≈ 9 mm12″ from the tail

≈ 24 mm12″ from the nose

≈ 99 mmnose rocker, at the tip

≈ 532 mmflat to within 3 mm, from 32 % to 63 % of the length

48 %of the length to the lowest point, from the tail

≈ 108 mmat its thickest, 51 % from the tail

≈ 27 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · shaded: the middle 80 % of its group · No usable side photo of this board: the median of 48 surf foil boards from 25 product lines. Tail ends set by rule, Claude or a brand convention on their photos, none checked by a person. · estimated