Axis, 2025

Frank Mako 1

2591mm long · 8'6"

432mm wide

≈ 193mm thick · estimated

120litres

Open in Studio See it on axisfoils.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Longer and leaner than most. A pin tail, a pointed nose and curvy rails.

derived · against the 66 other downwind foil boards in the atlas, read off the outlines.

As listed by Axis

Axis Frank Mako 1: every size as listed by Axis
size	length	width	thickness	weight
90 L	7'11 · 2413 mm	413 mm	≈ 163 mm · estimated	–
100 L	8'2 · 2489 mm	419 mm	≈ 173 mm · estimated	–
110 L	8'4 · 2540 mm	426 mm	≈ 183 mm · estimated	–
120 L	8'6 · 2591 mm	432 mm	≈ 193 mm · estimated	–
130 L	8'8 · 2642 mm	445 mm	≈ 199 mm · estimated	–

Every size side by side, tails on one line, one scale

Next to your board?

Lay the Axis Frank Mako 120 L over up to four others, at one scale.

Compare with…

Generations

After it · 2, 2026

The 2 90 L is 102 mm longer and 13 mm wider than the 1 90 L. Open the 2

listed length and width

1 90 L 2 90 L

The Axis Frank Mako over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 90 L outline · derived

55 %wide point, 1330 mm from the tail

5.97length over width

221mm wide 12″ from the tail

7,327cm² of planform

Read off the 100 L outline · derived

56 %wide point, 1385 mm from the tail

6.07length over width

220mm wide 12″ from the tail

7,668cm² of planform

Read off the 110 L outline · derived

55 %wide point, 1392 mm from the tail

6.09length over width

221mm wide 12″ from the tail

7,948cm² of planform

Read off the 120 L outline · derived

54 %wide point, 1411 mm from the tail

6.11length over width

221mm wide 12″ from the tail

8,228cm² of planform

Read off the 130 L outline · derived

54 %wide point, 1438 mm from the tail

5.94length over width

229mm wide 12″ from the tail

8,799cm² of planform

Rocker of the 90 L · scaled from the 120 L, borrowed (≈), estimated

≈ 109 mmtail rocker, at the tip

≈ 52 mm12″ from the tail

≈ 44 mm12″ from the nose

≈ 128 mmnose rocker, at the tip

≈ 701 mmflat to within 3 mm, from 32 % to 61 % of the length

47 %of the length to the lowest point, from the tail

≈ 163 mmat its thickest, 25 % from the tail

≈ 33 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 100 L · scaled from the 120 L, borrowed (≈), estimated

≈ 112 mmtail rocker, at the tip

≈ 55 mm12″ from the tail

≈ 47 mm12″ from the nose

≈ 132 mmnose rocker, at the tip

≈ 714 mmflat to within 3 mm, from 33 % to 61 % of the length

47 %of the length to the lowest point, from the tail

≈ 173 mmat its thickest, 25 % from the tail

≈ 34 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 110 L · scaled from the 120 L, borrowed (≈), estimated

≈ 115 mmtail rocker, at the tip

≈ 58 mm12″ from the tail

≈ 49 mm12″ from the nose

≈ 135 mmnose rocker, at the tip

≈ 723 mmflat to within 3 mm, from 33 % to 61 % of the length

47 %of the length to the lowest point, from the tail

≈ 183 mmat its thickest, 25 % from the tail

≈ 35 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 120 L · borrowed (≈), estimated

≈ 117 mmtail rocker, at the tip

≈ 60 mm12″ from the tail

≈ 51 mm12″ from the nose

≈ 138 mmnose rocker, at the tip

≈ 731 mmflat to within 3 mm, from 33 % to 61 % of the length

47 %of the length to the lowest point, from the tail

≈ 193 mmat its thickest, 25 % from the tail

≈ 36 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 130 L · scaled from the 120 L, borrowed (≈), estimated

≈ 119 mmtail rocker, at the tip

≈ 62 mm12″ from the tail

≈ 52 mm12″ from the nose

≈ 141 mmnose rocker, at the tip

≈ 740 mmflat to within 3 mm, from 33 % to 61 % of the length

47 %of the length to the lowest point, from the tail

≈ 199 mmat its thickest, 25 % from the tail

≈ 36 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · No usable side photo of this board: from Axis's photo of the Frank Mako 2026, the same line with other dimensions, a year later. Tail end set by Axis's photo convention on the Frank Mako 2026's photo, not checked by a person. · estimated