Gong, 2025

Surf Pinta EPS Pro 2025

2903mm long · 9'6"

599mm wide

76mm thick

81litres

Open in Studio See it on gong-galaxy.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Longer and leaner than most. A rounded pin tail, a full nose and parallel rails.

derived · against the 109 other surf boards in the atlas, read off the outlines.

As listed by Gong

Gong Surf Pinta EPS Pro 2025: every size as listed by Gong
size	length	width	thickness	weight
73 L	277.6cm · 2776 mm	584 mm	73 mm	–
76 L	282.7cm · 2827 mm	592 mm	75 mm	–
81 L	290.3cm · 2903 mm	599 mm	76 mm	–
93 L	310.4cm · 3104 mm	603 mm	81 mm	–

Every size side by side, tails on one line, one scale

Next to your board?

Lay the Gong Surf Pinta EPS Pro 81 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 73 L outline · derived

47 %wide point, 1301 mm from the tail

4.75length over width

444mm wide 12″ from the tail

14,034cm² of planform

Read off the 76 L outline · derived

47 %wide point, 1325 mm from the tail

4.77length over width

447mm wide 12″ from the tail

14,485cm² of planform

Read off the 81 L outline · derived

47 %wide point, 1360 mm from the tail

4.99length over width

435mm wide 12″ from the tail

14,623cm² of planform

Read off the 93 L outline · derived

46 %wide point, 1430 mm from the tail

5.13length over width

443mm wide 12″ from the tail

16,170cm² of planform

Rocker of the 73 L · scaled from the 81 L, estimated

≈ 99 mmtail rocker, at the tip

≈ 40 mm12″ from the tail

≈ 44 mm12″ from the nose

≈ 88 mmnose rocker, at the tip

≈ 660 mmflat to within 3 mm, from 36 % to 60 % of the length

50 %of the length to the lowest point, from the tail

≈ 72 mmat its thickest, 52 % from the tail

≈ 15 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 76 L · scaled from the 81 L, estimated

≈ 101 mmtail rocker, at the tip

≈ 41 mm12″ from the tail

≈ 45 mm12″ from the nose

≈ 90 mmnose rocker, at the tip

≈ 667 mmflat to within 3 mm, from 36 % to 59 % of the length

50 %of the length to the lowest point, from the tail

≈ 73 mmat its thickest, 52 % from the tail

≈ 16 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 81 L · estimated

≈ 104 mmtail rocker, at the tip

≈ 44 mm12″ from the tail

≈ 47 mm12″ from the nose

≈ 92 mmnose rocker, at the tip

≈ 677 mmflat to within 3 mm, from 36 % to 59 % of the length

50 %of the length to the lowest point, from the tail

≈ 75 mmat its thickest, 52 % from the tail

≈ 16 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 93 L · scaled from the 81 L, estimated

≈ 111 mmtail rocker, at the tip

≈ 50 mm12″ from the tail

≈ 53 mm12″ from the nose

≈ 99 mmnose rocker, at the tip

≈ 700 mmflat to within 3 mm, from 36 % to 59 % of the length

50 %of the length to the lowest point, from the tail

≈ 80 mmat its thickest, 52 % from the tail

≈ 17 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · On Gong's photo of the 81 L, whose tail rises 104 mm against a nose of 92.4 mm: its tail end may be the wrong way round. Tail end set by Gong's photo convention, not checked by a person. · estimated