Windsurf

JP Australia, 2026

Freestyle S-TEC 2026

2180mm long · 7'2"

625mm wide

≈ 140mm thick · estimated

95litres

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

A narrower tail than most. A pin tail, a medium nose and gently curved rails.

derived · against the 244 other windsurf boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia Freestyle S-TEC 2026: every size as listed by JP Australia
sizelengthwidththicknessweight
86 L215 cm · 2150 mm605 mm≈ 133 mm · estimated5.9 kg
95 L218 cm · 2180 mm625 mm≈ 140 mm · estimated6.2 kg
103 L219 cm · 2190 mm640 mm≈ 147 mm · estimated6.6 kg

Every size side by side, tails on one line, one scale

219021500 mm215086 L605 w218095 L621 w2190103 L640 w

Next to your board?

Lay the JP Australia Freestyle S-TEC 95 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia Freestyle S-TEC 2026 from above and from the side, every size at true scale, tails aligned
JP Australia Freestyle S-TEC 2026 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 86 L outline · derived

54 %wide point, 1164 mm from the tail

3.55length over width

386mm wide 12″ from the tail

10,122cm² of planform

Read off the 95 L outline · derived

54 %wide point, 1180 mm from the tail

3.51length over width

394mm wide 12″ from the tail

10,533cm² of planform

Read off the 103 L outline · derived

54 %wide point, 1185 mm from the tail

3.42length over width

405mm wide 12″ from the tail

10,907cm² of planform

Rocker of the 86 L · scaled from the 95 L, estimated

≈ 21 mmtail rocker, at the tip
≈ 8 mm12″ from the tail
≈ 59 mm12″ from the nose
≈ 158 mmnose rocker, at the tip
≈ 557 mmflat to within 3 mm, from 28 % to 54 % of the length
47 %of the length to the lowest point, from the tail
≈ 133 mmat its thickest, 44 % from the tail
≈ 67 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 95 L · estimated

≈ 21 mmtail rocker, at the tip
≈ 8 mm12″ from the tail
≈ 60 mm12″ from the nose
≈ 160 mmnose rocker, at the tip
≈ 561 mmflat to within 3 mm, from 28 % to 54 % of the length
47 %of the length to the lowest point, from the tail
≈ 140 mmat its thickest, 44 % from the tail
≈ 68 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 103 L · scaled from the 95 L, estimated

≈ 21 mmtail rocker, at the tip
≈ 8 mm12″ from the tail
≈ 61 mm12″ from the nose
≈ 161 mmnose rocker, at the tip
≈ 563 mmflat to within 3 mm, from 28 % to 54 % of the length
47 %of the length to the lowest point, from the tail
≈ 147 mmat its thickest, 44 % from the tail
≈ 68 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · On JP Australia's photo of the 95 L, where its traced side holds 23 % more than the listed 95 L: probably shot from slightly above. Tail end set by rule. · estimated

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived