JP Australia, 2026

Funster 2026

2600mm long · 8'6"

900mm wide

≈ 140mm thick · medium confidence

170litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

The 2025 outline, refined. The 170 L is the same length and width as the 2025 170 L.

170 L against the 2025 170 L, listed length and width.

As listed by JP Australia

JP Australia Funster 2026: every size as listed by JP Australia
size	length	width	thickness	weight
170 L	260 cm · 2600 mm	900 mm	140 mm · medium confidence	13.1 kg
200 L	270 cm · 2700 mm	950 mm	≈ 150 mm · estimated	14.6 kg
240 L	282 cm · 2820 mm	1000 mm	≈ 163 mm · estimated	16.6 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the JP Australia Funster 170 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2025

The 2026 170 L is the same length and width as the 2025 170 L. Open the 2025

listed length and width

2026 170 L 2025 170 L

The JP Australia Funster over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 170 L outline · derived

52 %wide point, 1358 mm from the tail

2.96length over width

609mm wide 12″ from the tail

18,671cm² of planform

Read off the 200 L outline · derived

52 %wide point, 1411 mm from the tail

2.84length over width

650mm wide 12″ from the tail

20,946cm² of planform

Read off the 240 L outline · derived

52 %wide point, 1473 mm from the tail

2.82length over width

674mm wide 12″ from the tail

23,028cm² of planform

Rocker of the 170 L · measured

54 mmtail rocker, at the tip

37 mm12″ from the tail

59 mm12″ from the nose

144 mmnose rocker, at the tip

553 mmflat to within 3 mm, from 44 % to 66 % of the length

48 %of the length to the lowest point, from the tail

140 mmat its thickest, 41 % from the tail

32 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 200 L · scaled from the 170 L measured

56 mmtail rocker, at the tip

39 mm12″ from the tail

64 mm12″ from the nose

150 mmnose rocker, at the tip

568 mmflat to within 3 mm, from 44 % to 65 % of the length

48 %of the length to the lowest point, from the tail

150 mmat its thickest, 41 % from the tail

33 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 240 L · scaled from the 170 L measured

59 mmtail rocker, at the tip

41 mm12″ from the tail

69 mm12″ from the nose

157 mmnose rocker, at the tip

585 mmflat to within 3 mm, from 45 % to 65 % of the length

48 %of the length to the lowest point, from the tail

163 mmat its thickest, 41 % from the tail

35 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 170 L. Tail end set by rule.