Windsurf

JP Australia, 2026

Slalom S-TEC 2026

2280mm long · 7'6"

720mm wide

≈ 136mm thick · medium confidence

119litres

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Shorter and fuller than most. A rounded pin tail, a medium nose and gently curved rails.

derived · against the 244 other windsurf boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia Slalom S-TEC 2026: every size as listed by JP Australia
sizelengthwidththicknessweight
97 L230 cm · 2300 mm625 mm≈ 127 mm · estimated5.9 kg
105 L230 cm · 2300 mm660 mm≈ 130 mm · estimated6 kg
119 L228 cm · 2280 mm720 mm136 mm · medium confidence6.7 kg
125 L228 cm · 2280 mm760 mm≈ 136 mm · estimated6.9 kg
139 L228 cm · 2280 mm850 mm≈ 135 mm · estimated7.5 kg

Every size side by side, tails on one line, one scale

230022800 mm230097 L625 w2300105 L660 w2280119 L713 w2280125 L760 w2280139 L850 w

Next to your board?

Lay the JP Australia Slalom S-TEC 119 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia Slalom S-TEC 2026 from above and from the side, every size at true scale, tails aligned
JP Australia Slalom S-TEC 2026 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 97 L outline · derived

53 %wide point, 1212 mm from the tail

3.68length over width

437mm wide 12″ from the tail

11,627cm² of planform

Read off the 105 L outline · derived

53 %wide point, 1212 mm from the tail

3.48length over width

461mm wide 12″ from the tail

12,278cm² of planform

Read off the 119 L outline · derived

53 %wide point, 1202 mm from the tail

3.20length over width

500mm wide 12″ from the tail

13,140cm² of planform

Read off the 125 L outline · derived

53 %wide point, 1202 mm from the tail

3.00length over width

533mm wide 12″ from the tail

14,016cm² of planform

Read off the 139 L outline · derived

53 %wide point, 1202 mm from the tail

2.68length over width

596mm wide 12″ from the tail

15,675cm² of planform

Rocker of the 97 L · scaled from the 119 L measured

45 mmtail rocker, at the tip
22 mm12″ from the tail
49 mm12″ from the nose
148 mmnose rocker, at the tip
525 mmflat to within 3 mm, from 38 % to 61 % of the length
47 %of the length to the lowest point, from the tail
127 mmat its thickest, 44 % from the tail
29 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 105 L · scaled from the 119 L measured

45 mmtail rocker, at the tip
22 mm12″ from the tail
49 mm12″ from the nose
148 mmnose rocker, at the tip
525 mmflat to within 3 mm, from 38 % to 61 % of the length
47 %of the length to the lowest point, from the tail
130 mmat its thickest, 44 % from the tail
29 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 119 L · measured

44 mmtail rocker, at the tip
22 mm12″ from the tail
48 mm12″ from the nose
146 mmnose rocker, at the tip
522 mmflat to within 3 mm, from 38 % to 61 % of the length
47 %of the length to the lowest point, from the tail
136 mmat its thickest, 44 % from the tail
28 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 125 L · scaled from the 119 L measured

44 mmtail rocker, at the tip
22 mm12″ from the tail
48 mm12″ from the nose
146 mmnose rocker, at the tip
522 mmflat to within 3 mm, from 38 % to 61 % of the length
47 %of the length to the lowest point, from the tail
136 mmat its thickest, 44 % from the tail
28 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 139 L · scaled from the 119 L measured

44 mmtail rocker, at the tip
22 mm12″ from the tail
48 mm12″ from the nose
146 mmnose rocker, at the tip
522 mmflat to within 3 mm, from 38 % to 61 % of the length
47 %of the length to the lowest point, from the tail
135 mmat its thickest, 44 % from the tail
28 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 119 L. Tail end set by Claude, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived