JP Australia, 2026

Super Ride 2026

2400mm long · 7'10"

730mm wide

≈ 133mm thick · medium confidence

125litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

The 2025 outline, refined. The 125 L is the same length and width as the 2025 125 L.

125 L against the 2025 125 L, listed length and width.

As listed by JP Australia

JP Australia Super Ride 2026: every size as listed by JP Australia
size	length	width	thickness	weight
115 L	238 cm · 2380 mm	690 mm	≈ 131 mm · estimated	7.5 kg
125 L	240 cm · 2400 mm	730 mm	133 mm · medium confidence	7.7–9 kg
135 L	242 cm · 2420 mm	770 mm	≈ 135 mm · estimated	8.1–9.4 kg
145 L	246 cm · 2460 mm	810 mm	≈ 136 mm · estimated	8.6–9.9 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the JP Australia Super Ride 125 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2025

The 2026 125 L is the same length and width as the 2025 125 L. Open the 2025

listed length and width

2026 125 L 2025 125 L

The JP Australia Super Ride over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 115 L outline · derived

53 %wide point, 1254 mm from the tail

3.47length over width

480mm wide 12″ from the tail

13,266cm² of planform

Read off the 125 L outline · derived

55 %wide point, 1319 mm from the tail

3.25length over width

489mm wide 12″ from the tail

14,225cm² of planform

Read off the 135 L outline · derived

55 %wide point, 1330 mm from the tail

3.14length over width

508mm wide 12″ from the tail

14,945cm² of planform

Read off the 145 L outline · derived

55 %wide point, 1352 mm from the tail

3.04length over width

531mm wide 12″ from the tail

15,981cm² of planform

Rocker of the 115 L · scaled from the 125 L measured

50 mmtail rocker, at the tip

30 mm12″ from the tail

47 mm12″ from the nose

133 mmnose rocker, at the tip

469 mmflat to within 3 mm, from 41 % to 60 % of the length

50 %of the length to the lowest point, from the tail

131 mmat its thickest, 38 % from the tail

32 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 125 L · measured

50 mmtail rocker, at the tip

30 mm12″ from the tail

48 mm12″ from the nose

134 mmnose rocker, at the tip

471 mmflat to within 3 mm, from 41 % to 60 % of the length

50 %of the length to the lowest point, from the tail

133 mmat its thickest, 38 % from the tail

32 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 135 L · scaled from the 125 L measured

51 mmtail rocker, at the tip

31 mm12″ from the tail

48 mm12″ from the nose

136 mmnose rocker, at the tip

473 mmflat to within 3 mm, from 41 % to 60 % of the length

50 %of the length to the lowest point, from the tail

135 mmat its thickest, 38 % from the tail

32 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 145 L · scaled from the 125 L measured

51 mmtail rocker, at the tip

32 mm12″ from the tail

50 mm12″ from the nose

138 mmnose rocker, at the tip

476 mmflat to within 3 mm, from 41 % to 60 % of the length

50 %of the length to the lowest point, from the tail

136 mmat its thickest, 38 % from the tail

33 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 125 L. Tail end set by rule.