Windsurf

JP Australia, 2020

Super Sport 2020

2340mm long · 7'8"

760mm wide

≈ 120mm thick · medium confidence

122litres

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Shorter and fuller than most. A rounded pin tail, a full nose and gently curved rails.

derived · against the 244 other windsurf boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia Super Sport 2020: every size as listed by JP Australia
sizelengthwidththicknessweight
111 L234 cm · 2340 mm700 mm≈ 119 mm · estimated6.9 kg
122 L234 cm · 2340 mm760 mm120 mm · medium confidence6.9–7.5 kg
133 L234 cm · 2340 mm820 mm≈ 122 mm · estimated7.9 kg

Every size side by side, tails on one line, one scale

23400 mm2340111 L700 w2340122 L765 w2340133 L820 w

Next to your board?

Lay the JP Australia Super Sport 122 L over up to four others, at one scale.

Compare with…

Generations

After it · 2021

The 2021 122 L is the same length and width as the 2020 122 L. Open the 2021

listed length and width

2020 122 L over the 2021 122 L, tails aligned, one scale
2020 122 L 2021 122 L

The JP Australia Super Sport over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia Super Sport 2020 from above and from the side, every size at true scale, tails aligned
JP Australia Super Sport 2020 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 111 L outline · derived

52 %wide point, 1225 mm from the tail

3.34length over width

484mm wide 12″ from the tail

13,315cm² of planform

Read off the 122 L outline · derived

52 %wide point, 1225 mm from the tail

3.06length over width

529mm wide 12″ from the tail

14,547cm² of planform

Read off the 133 L outline · derived

52 %wide point, 1225 mm from the tail

2.85length over width

567mm wide 12″ from the tail

15,597cm² of planform

Rocker of the 111 L · scaled from the 122 L measured

33 mmtail rocker, at the tip
25 mm12″ from the tail
61 mm12″ from the nose
148 mmnose rocker, at the tip
456 mmflat to within 3 mm, from 40 % to 60 % of the length
50 %of the length to the lowest point, from the tail
119 mmat its thickest, 36 % from the tail
24 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 122 L · measured

33 mmtail rocker, at the tip
25 mm12″ from the tail
61 mm12″ from the nose
148 mmnose rocker, at the tip
456 mmflat to within 3 mm, from 40 % to 60 % of the length
50 %of the length to the lowest point, from the tail
120 mmat its thickest, 36 % from the tail
24 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 133 L · scaled from the 122 L measured

33 mmtail rocker, at the tip
25 mm12″ from the tail
61 mm12″ from the nose
148 mmnose rocker, at the tip
456 mmflat to within 3 mm, from 40 % to 60 % of the length
50 %of the length to the lowest point, from the tail
122 mmat its thickest, 36 % from the tail
24 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 122 L. Tail end set by Claude, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived