Windsurf

JP Australia, 2026

Ultimate Wave S-TEC 2026

2240mm long · 7'4"

590mm wide

≈ 149mm thick · estimated

87litres

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

A narrower tail than most. A square tail, a pointed nose and curvy rails.

derived · against the 104 other windsurf boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia Ultimate Wave S-TEC 2026: every size as listed by JP Australia
sizelengthwidththicknessweight
75 L221 cm · 2210 mm555 mm≈ 139 mm · estimated5.6 kg
81 L223 cm · 2230 mm575 mm≈ 143 mm · estimated5.8 kg
87 L224 cm · 2240 mm590 mm≈ 149 mm · estimated6 kg
93 L226 cm · 2260 mm605 mm≈ 154 mm · estimated6.2 kg
101 L229 cm · 2290 mm620 mm≈ 161 mm · estimated6.3 kg

Every size side by side, tails on one line, one scale

229022100 mm221075 L555 w223081 L575 w224087 L586 w226093 L605 w2290101 L620 w

Next to your board?

Lay the JP Australia Ultimate Wave S-TEC 87 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia Ultimate Wave S-TEC 2026 from above and from the side, every size at true scale, tails aligned
JP Australia Ultimate Wave S-TEC 2026 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 75 L outline · derived

52 %wide point, 1157 mm from the tail

3.98length over width

340mm wide 12″ from the tail

9,340cm² of planform

Read off the 81 L outline · derived

52 %wide point, 1168 mm from the tail

3.88length over width

351mm wide 12″ from the tail

9,764cm² of planform

Read off the 87 L outline · derived

52 %wide point, 1173 mm from the tail

3.83length over width

357mm wide 12″ from the tail

9,987cm² of planform

Read off the 93 L outline · derived

52 %wide point, 1183 mm from the tail

3.74length over width

367mm wide 12″ from the tail

10,411cm² of planform

Read off the 101 L outline · derived

52 %wide point, 1199 mm from the tail

3.69length over width

374mm wide 12″ from the tail

10,811cm² of planform

Rocker of the 75 L · scaled from the 87 L, estimated

≈ 47 mmtail rocker, at the tip
≈ 24 mm12″ from the tail
≈ 58 mm12″ from the nose
≈ 185 mmnose rocker, at the tip
≈ 479 mmflat to within 3 mm, from 39 % to 61 % of the length
48 %of the length to the lowest point, from the tail
≈ 139 mmat its thickest, 49 % from the tail
≈ 45 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 81 L · scaled from the 87 L, estimated

≈ 47 mmtail rocker, at the tip
≈ 24 mm12″ from the tail
≈ 59 mm12″ from the nose
≈ 187 mmnose rocker, at the tip
≈ 481 mmflat to within 3 mm, from 39 % to 60 % of the length
48 %of the length to the lowest point, from the tail
≈ 143 mmat its thickest, 49 % from the tail
≈ 45 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 87 L · estimated

≈ 47 mmtail rocker, at the tip
≈ 24 mm12″ from the tail
≈ 59 mm12″ from the nose
≈ 188 mmnose rocker, at the tip
≈ 482 mmflat to within 3 mm, from 39 % to 60 % of the length
48 %of the length to the lowest point, from the tail
≈ 149 mmat its thickest, 49 % from the tail
≈ 45 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 93 L · scaled from the 87 L, estimated

≈ 48 mmtail rocker, at the tip
≈ 25 mm12″ from the tail
≈ 60 mm12″ from the nose
≈ 190 mmnose rocker, at the tip
≈ 485 mmflat to within 3 mm, from 39 % to 60 % of the length
48 %of the length to the lowest point, from the tail
≈ 154 mmat its thickest, 49 % from the tail
≈ 46 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 101 L · scaled from the 87 L, estimated

≈ 49 mmtail rocker, at the tip
≈ 25 mm12″ from the tail
≈ 62 mm12″ from the nose
≈ 192 mmnose rocker, at the tip
≈ 488 mmflat to within 3 mm, from 39 % to 60 % of the length
48 %of the length to the lowest point, from the tail
≈ 161 mmat its thickest, 49 % from the tail
≈ 46 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · On JP Australia's photo of the 87 L, where its traced side holds 32 % more than the listed 87 L: probably shot from slightly above. Tail end set by rule. · estimated

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived