Stand-up paddle

JP Australia, 2024

WindsupAir SL 2024

3350mm long · 11'0"

870mm wide

152mm thick

353litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

The 2023 outline, refined. The 353 L is the same length and width as the 2023 353 L.

353 L against the 2023 353 L, listed length and width.

As listed by JP Australia

JP Australia WindsupAir SL 2024: every size as listed by JP Australia
sizelengthwidththicknessweight
353 L335 cm · 3350 mm870 mm152 mm8.8 kg

Next to your board?

Lay the JP Australia WindsupAir SL 353 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2023

The 2024 353 L is the same length and width as the 2023 353 L. Open the 2023

listed length and width

2024 353 L over the 2023 353 L, tails aligned, one scale
2024 353 L 2023 353 L

After it · 2025

The 2025 353 L is the same length and width as the 2024 353 L. Open the 2025

listed length and width

2024 353 L over the 2025 353 L, tails aligned, one scale
2024 353 L 2025 353 L

The JP Australia WindsupAir SL over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia WindsupAir SL 2024 from above and from the side, every size at true scale, tails aligned
JP Australia WindsupAir SL 2024 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 353 L outline · derived

48 %wide point, 1614 mm from the tail

3.81length over width

573mm wide 12″ from the tail

23,166cm² of planform

Rocker of the 353 L · estimated

≈ 104 mmtail rocker, at the tip
≈ 43 mm12″ from the tail
≈ 17 mm12″ from the nose
≈ 101 mmnose rocker, at the tip
≈ 114 mmflat to within 3 mm, from 44 % to 47 % of the length
47 %of the length to the lowest point, from the tail
≈ 216 mmat its thickest, 45 % from the tail · on the photo; JP Australia lists ≈ 152 mm
≈ 71 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · On JP Australia's photo of the 353 L, whose bottom line has a 11–13 mm step at 47 % of the length: a foil plate traced as hull, so it lends to no other board. Tail end set by Claude, not checked by a person. · estimated

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived