Kalama, 2025

Gator All Performance 2025

2616mm long · 8'7"

610mm wide

≈ 154mm thick · medium confidence

130litres

Open in Studio See it on kalamaperformance.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Its width sits further forward. A pin tail, a medium nose and curvy rails.

derived · against the 66 other downwind foil boards in the atlas, read off the outlines.

As listed by Kalama

Kalama Gator All Performance 2025: every size as listed by Kalama
size	length	width	thickness	weight
95 L	7’8” · 2337 mm	470 mm	≈ 164 mm · estimated	–
105 L	8’0” · 2438 mm	508 mm	≈ 160 mm · estimated	–
115 L	8’4” · 2540 mm	546 mm	≈ 157 mm · estimated	–
130 L	8'7'' · 2616 mm	610 mm	154 mm · medium confidence	–

Every size side by side, tails on one line, one scale

Next to your board?

Lay the Kalama Gator All Performance 130 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 95 L outline · derived

65 %wide point, 1514 mm from the tail

4.97length over width

131mm wide 12″ from the tail

7,320cm² of planform

Read off the 105 L outline · derived

65 %wide point, 1579 mm from the tail

4.80length over width

137mm wide 12″ from the tail

8,257cm² of planform

Read off the 115 L outline · derived

65 %wide point, 1645 mm from the tail

4.65length over width

144mm wide 12″ from the tail

9,246cm² of planform

Read off the 130 L outline · derived

65 %wide point, 1695 mm from the tail

4.29length over width

158mm wide 12″ from the tail

10,640cm² of planform

Rocker of the 95 L · scaled from the 130 L measured

107 mmtail rocker, at the tip

3 mm12″ from the tail

54 mm12″ from the nose

122 mmnose rocker, at the tip

1112 mmflat to within 3 mm, from 13 % to 60 % of the length

47 %of the length to the lowest point, from the tail

164 mmat its thickest, 36 % from the tail

44 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 105 L · scaled from the 130 L measured

111 mmtail rocker, at the tip

3 mm12″ from the tail

58 mm12″ from the nose

128 mmnose rocker, at the tip

1143 mmflat to within 3 mm, from 13 % to 60 % of the length

47 %of the length to the lowest point, from the tail

160 mmat its thickest, 36 % from the tail

46 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 115 L · scaled from the 130 L measured

116 mmtail rocker, at the tip

7 mm12″ from the tail

63 mm12″ from the nose

134 mmnose rocker, at the tip

1132 mmflat to within 3 mm, from 15 % to 60 % of the length

47 %of the length to the lowest point, from the tail

157 mmat its thickest, 36 % from the tail

48 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 130 L · measured

120 mmtail rocker, at the tip

11 mm12″ from the tail

66 mm12″ from the nose

138 mmnose rocker, at the tip

1149 mmflat to within 3 mm, from 16 % to 60 % of the length

47 %of the length to the lowest point, from the tail

154 mmat its thickest, 36 % from the tail

49 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on Kalama's photo of the 130 L. Tail end set by Kalama's photo convention, not checked by a person.