Windsurf

Starboard, 2024

Carve Windsurf Board 2024

2380mm long · 7'10"

710mm wide

117mm thick

119litres

Open in Studio See it on star-board.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Its width sits further forward. A pin tail, a full nose and parallel rails.

derived · against the 104 other windsurf boards in the atlas, read off the outlines.

As listed by Starboard

Starboard Carve Windsurf Board 2024: every size as listed by Starboard
sizelengthwidththicknessweight
99 L238 cm · 2380 mm640 mm123 mm · medium confidence6.8–7.8 kg
109 L238 cm · 2380 mm670 mm116 mm7.1–8.2 kg
119 L238 cm · 2380 mm710 mm117 mm7.5–8.7 kg
129 L238 cm · 2380 mm760 mm116 mm7.8–9 kg
139 L240 cm · 2400 mm800 mm123 mm8.4–9.5 kg
149 L247 cm · 2470 mm800 mm126 mm8.6–10.1 kg
159 L255 cm · 2550 mm810 mm128 mm8.9–10.3 kg
169 L258 cm · 2580 mm840 mm132 mm9.2–10.7 kg

Every size side by side, tails on one line, one scale

258023800 mm238099 L640 w2380109 L670 w2380119 L728 w2380129 L760 w2400139 L800 w2470149 L800 w2550159 L810 w2580169 L840 w

Next to your board?

Lay the Starboard Carve Windsurf Board 119 L over up to four others, at one scale.

Compare with…

Generations

After it · 2025

The 2025 119 L is the same length and width as the 2024 119 L; its wide point moved 109 mm toward the tail. Open the 2025

listed length and width · wide point derived

2024 119 L over the 2025 119 L, tails aligned, one scale
2024 119 L 2025 119 L

The Starboard Carve Windsurf Board over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Starboard Carve Windsurf Board 2024 from above and from the side, every size at true scale, tails aligned
Starboard Carve Windsurf Board 2024 from the side, true proportions: the bottom's rocker over a flat table, every size; borrowed (≈), drawn hollow

Read off the 99 L outline · derived

59 %wide point, 1392 mm from the tail

3.72length over width

417mm wide 12″ from the tail

12,274cm² of planform

Read off the 109 L outline · derived

59 %wide point, 1392 mm from the tail

3.55length over width

436mm wide 12″ from the tail

12,849cm² of planform

Read off the 119 L outline · derived

59 %wide point, 1392 mm from the tail

3.27length over width

474mm wide 12″ from the tail

13,965cm² of planform

Read off the 129 L outline · derived

59 %wide point, 1392 mm from the tail

3.13length over width

495mm wide 12″ from the tail

14,575cm² of planform

Read off the 139 L outline · derived

59 %wide point, 1403 mm from the tail

3.00length over width

519mm wide 12″ from the tail

15,471cm² of planform

Read off the 149 L outline · derived

59 %wide point, 1444 mm from the tail

3.09length over width

511mm wide 12″ from the tail

15,922cm² of planform

Read off the 159 L outline · derived

59 %wide point, 1491 mm from the tail

3.15length over width

508mm wide 12″ from the tail

16,644cm² of planform

Read off the 169 L outline · derived

59 %wide point, 1509 mm from the tail

3.07length over width

524mm wide 12″ from the tail

17,463cm² of planform

Rocker of the 99 L · scaled from the 119 L, borrowed (≈), estimated

≈ 36 mmtail rocker, at the tip
≈ 20 mm12″ from the tail
≈ 59 mm12″ from the nose
≈ 149 mmnose rocker, at the tip
≈ 576 mmflat to within 3 mm, from 37 % to 61 % of the length
48 %of the length to the lowest point, from the tail
≈ 123 mmat its thickest, 51 % from the tail
≈ 33 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 109 L · scaled from the 119 L, borrowed (≈), estimated

≈ 36 mmtail rocker, at the tip
≈ 20 mm12″ from the tail
≈ 59 mm12″ from the nose
≈ 149 mmnose rocker, at the tip
≈ 576 mmflat to within 3 mm, from 37 % to 61 % of the length
48 %of the length to the lowest point, from the tail
≈ 116 mmat its thickest, 51 % from the tail
≈ 33 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 119 L · borrowed (≈), estimated

≈ 36 mmtail rocker, at the tip
≈ 20 mm12″ from the tail
≈ 59 mm12″ from the nose
≈ 149 mmnose rocker, at the tip
≈ 576 mmflat to within 3 mm, from 37 % to 61 % of the length
48 %of the length to the lowest point, from the tail
≈ 117 mmat its thickest, 51 % from the tail
≈ 33 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 129 L · scaled from the 119 L, borrowed (≈), estimated

≈ 36 mmtail rocker, at the tip
≈ 20 mm12″ from the tail
≈ 59 mm12″ from the nose
≈ 149 mmnose rocker, at the tip
≈ 576 mmflat to within 3 mm, from 37 % to 61 % of the length
48 %of the length to the lowest point, from the tail
≈ 116 mmat its thickest, 51 % from the tail
≈ 33 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 139 L · scaled from the 119 L, borrowed (≈), estimated

≈ 37 mmtail rocker, at the tip
≈ 21 mm12″ from the tail
≈ 60 mm12″ from the nose
≈ 150 mmnose rocker, at the tip
≈ 578 mmflat to within 3 mm, from 37 % to 61 % of the length
48 %of the length to the lowest point, from the tail
≈ 123 mmat its thickest, 51 % from the tail
≈ 33 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 149 L · scaled from the 119 L, borrowed (≈), estimated

≈ 38 mmtail rocker, at the tip
≈ 22 mm12″ from the tail
≈ 64 mm12″ from the nose
≈ 155 mmnose rocker, at the tip
≈ 586 mmflat to within 3 mm, from 37 % to 61 % of the length
48 %of the length to the lowest point, from the tail
≈ 126 mmat its thickest, 51 % from the tail
≈ 34 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 159 L · scaled from the 119 L, borrowed (≈), estimated

≈ 39 mmtail rocker, at the tip
≈ 23 mm12″ from the tail
≈ 68 mm12″ from the nose
≈ 160 mmnose rocker, at the tip
≈ 595 mmflat to within 3 mm, from 38 % to 61 % of the length
48 %of the length to the lowest point, from the tail
≈ 128 mmat its thickest, 51 % from the tail
≈ 35 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 169 L · scaled from the 119 L, borrowed (≈), estimated

≈ 40 mmtail rocker, at the tip
≈ 23 mm12″ from the tail
≈ 69 mm12″ from the nose
≈ 162 mmnose rocker, at the tip
≈ 599 mmflat to within 3 mm, from 38 % to 61 % of the length
48 %of the length to the lowest point, from the tail
≈ 132 mmat its thickest, 51 % from the tail
≈ 36 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · shaded: the middle 80 % of its group · No usable side photo of this board: the median of 40 windsurf boards from 31 product lines. Tail ends set by rule, Claude or a brand convention on their photos, none checked by a person. · estimated

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived