Wing foil

Axis, 2025

Frank Mini Dart 2025

1930mm long · 6'4"

520mm wide

≈ 154mm thick · estimated

100litres

Open in Studio See it on axisfoils.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Longer and leaner than most. A square tail, a medium nose and gently curved rails.

derived · against the 169 other wing foil boards in the atlas, read off the outlines.

As listed by Axis

Axis Frank Mini Dart 2025: every size as listed by Axis
sizelengthwidththicknessweight
50 L1676.4mm · 1676 mm470 mm≈ 98 mm · estimated–
60 L1727.2mm · 1727 mm476 mm≈ 112 mm · estimated–
70 L1778mm · 1778 mm486 mm≈ 125 mm · estimated–
80 L1828.8mm · 1829 mm495 mm≈ 136 mm · estimated–
90 L1879.6mm · 1880 mm508 mm≈ 145 mm · estimated–
100 L1930.4mm · 1930 mm520 mm≈ 154 mm · estimated–

Every size side by side, tails on one line, one scale

193016760 mm167650 L468 w172760 L475 w177870 L481 w182980 L494 w188090 L507 w1930100 L520 w

Next to your board?

Lay the Axis Frank Mini Dart 100 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Axis Frank Mini Dart 2025 from above and from the side, every size at true scale, tails aligned
Axis Frank Mini Dart 2025 from the side, true proportions: the bottom's rocker over a flat table, every size; borrowed (≈), drawn hollow

Read off the 50 L outline · derived

52 %wide point, 871 mm from the tail

3.58length over width

368mm wide 12″ from the tail

6,390cm² of planform

Read off the 60 L outline · derived

52 %wide point, 897 mm from the tail

3.64length over width

372mm wide 12″ from the tail

6,681cm² of planform

Read off the 70 L outline · derived

52 %wide point, 919 mm from the tail

3.69length over width

370mm wide 12″ from the tail

6,933cm² of planform

Read off the 80 L outline · derived

52 %wide point, 950 mm from the tail

3.70length over width

382mm wide 12″ from the tail

7,352cm² of planform

Read off the 90 L outline · derived

52 %wide point, 973 mm from the tail

3.71length over width

389mm wide 12″ from the tail

7,744cm² of planform

Read off the 100 L outline · derived

52 %wide point, 999 mm from the tail

3.72length over width

390mm wide 12″ from the tail

8,113cm² of planform

Rocker of the 50 L · scaled from the 100 L, borrowed (≈), estimated

≈ 43 mmtail rocker, at the tip
≈ 8 mm12″ from the tail
≈ 29 mm12″ from the nose
≈ 119 mmnose rocker, at the tip
≈ 471 mmflat to within 3 mm, from 34 % to 62 % of the length
48 %of the length to the lowest point, from the tail
≈ 98 mmat its thickest, 54 % from the tail
≈ 39 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 60 L · scaled from the 100 L, borrowed (≈), estimated

≈ 45 mmtail rocker, at the tip
≈ 9 mm12″ from the tail
≈ 32 mm12″ from the nose
≈ 123 mmnose rocker, at the tip
≈ 478 mmflat to within 3 mm, from 34 % to 62 % of the length
48 %of the length to the lowest point, from the tail
≈ 112 mmat its thickest, 54 % from the tail
≈ 40 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 70 L · scaled from the 100 L, borrowed (≈), estimated

≈ 46 mmtail rocker, at the tip
≈ 9 mm12″ from the tail
≈ 34 mm12″ from the nose
≈ 127 mmnose rocker, at the tip
≈ 484 mmflat to within 3 mm, from 34 % to 62 % of the length
48 %of the length to the lowest point, from the tail
≈ 125 mmat its thickest, 54 % from the tail
≈ 41 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 80 L · scaled from the 100 L, borrowed (≈), estimated

≈ 48 mmtail rocker, at the tip
≈ 10 mm12″ from the tail
≈ 37 mm12″ from the nose
≈ 130 mmnose rocker, at the tip
≈ 490 mmflat to within 3 mm, from 35 % to 61 % of the length
48 %of the length to the lowest point, from the tail
≈ 136 mmat its thickest, 54 % from the tail
≈ 42 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 90 L · scaled from the 100 L, borrowed (≈), estimated

≈ 49 mmtail rocker, at the tip
≈ 10 mm12″ from the tail
≈ 39 mm12″ from the nose
≈ 134 mmnose rocker, at the tip
≈ 497 mmflat to within 3 mm, from 35 % to 61 % of the length
48 %of the length to the lowest point, from the tail
≈ 145 mmat its thickest, 54 % from the tail
≈ 43 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 100 L · borrowed (≈), estimated

≈ 51 mmtail rocker, at the tip
≈ 11 mm12″ from the tail
≈ 41 mm12″ from the nose
≈ 138 mmnose rocker, at the tip
≈ 503 mmflat to within 3 mm, from 35 % to 61 % of the length
48 %of the length to the lowest point, from the tail
≈ 154 mmat its thickest, 54 % from the tail
≈ 45 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · shaded: the middle 80 % of its group · No usable side photo of this board: the median of 90 hard wing boards from 58 product lines. Tail ends set by rule, Claude or a brand convention on their photos, none checked by a person. · estimated

Reviews & Videos

Original pages · 6

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived