Axis, 2022

Froth 2022

1372mm long · 4'6"

610mm wide

≈ 98mm thick · estimated

55litres

Open in Studio See it on axisfoils.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Its width sits further back. A square tail, a full nose and parallel rails.

derived · against the 169 other wing foil boards in the atlas, read off the outlines.

As listed by Axis

Axis Froth 2022: every size as listed by Axis
size	length	width	thickness	weight
45 L	4'4 · 1321 mm	584 mm	≈ 87 mm · estimated	–
55 L	4'6 · 1372 mm	610 mm	≈ 98 mm · estimated	–
65 L	4'8 · 1422 mm	622 mm	≈ 109 mm · estimated	–
75 L	4'10 · 1473 mm	635 mm	≈ 119 mm · estimated	–
85 L	5'0 · 1524 mm	648 mm	≈ 128 mm · estimated	–
90 L	5'1 · 1549 mm	660 mm	≈ 131 mm · estimated	–
95 L	5'2 · 1575 mm	673 mm	≈ 133 mm · estimated	–
105 L	5'4 · 1626 mm	686 mm	≈ 140 mm · estimated	–
110 L	5'6 · 1676 mm	711 mm	≈ 137 mm · estimated	–
120 L	5'8 · 1727 mm	737 mm	≈ 140 mm · estimated	–
135 L	5'11 · 1803 mm	762 mm	≈ 146 mm · estimated	–
145 L	6'4 · 1930 mm	787 mm	≈ 142 mm · estimated	–
160 L	6'8 · 2032 mm	813 mm	≈ 144 mm · estimated	–

Every size side by side, tails on one line, one scale

Next to your board?

Lay the Axis Froth 55 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 45 L outline · derived

49 %wide point, 645 mm from the tail

2.26length over width

520mm wide 12″ from the tail

6,520cm² of planform

Read off the 55 L outline · derived

49 %wide point, 670 mm from the tail

2.25length over width

538mm wide 12″ from the tail

7,065cm² of planform

Read off the 65 L outline · derived

49 %wide point, 695 mm from the tail

2.29length over width

544mm wide 12″ from the tail

7,479cm² of planform

Read off the 75 L outline · derived

49 %wide point, 720 mm from the tail

2.32length over width

551mm wide 12″ from the tail

7,904cm² of planform

Read off the 85 L outline · derived

49 %wide point, 745 mm from the tail

2.35length over width

558mm wide 12″ from the tail

8,340cm² of planform

Read off the 90 L outline · derived

49 %wide point, 757 mm from the tail

2.35length over width

567mm wide 12″ from the tail

8,646cm² of planform

Read off the 95 L outline · derived

49 %wide point, 770 mm from the tail

2.34length over width

576mm wide 12″ from the tail

8,956cm² of planform

Read off the 105 L outline · derived

48 %wide point, 787 mm from the tail

2.44length over width

572mm wide 12″ from the tail

9,112cm² of planform

Read off the 110 L outline · derived

47 %wide point, 786 mm from the tail

2.43length over width

595mm wide 12″ from the tail

9,780cm² of planform

Read off the 120 L outline · derived

47 %wide point, 815 mm from the tail

2.41length over width

612mm wide 12″ from the tail

10,435cm² of planform

Read off the 135 L outline · derived

47 %wide point, 844 mm from the tail

2.43length over width

630mm wide 12″ from the tail

11,315cm² of planform

Read off the 145 L outline · derived

47 %wide point, 906 mm from the tail

2.42length over width

666mm wide 12″ from the tail

12,958cm² of planform

Read off the 160 L outline · derived

49 %wide point, 993 mm from the tail

2.50length over width

656mm wide 12″ from the tail

13,955cm² of planform

Rocker of the 45 L · scaled from the 55 L, borrowed (≈), estimated

≈ 32 mmtail rocker, at the tip

≈ 5 mm12″ from the tail

≈ 15 mm12″ from the nose

≈ 92 mmnose rocker, at the tip

≈ 429 mmflat to within 3 mm, from 31 % to 63 % of the length

50 %of the length to the lowest point, from the tail

≈ 87 mmat its thickest, 53 % from the tail

≈ 30 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 55 L · borrowed (≈), estimated

≈ 33 mmtail rocker, at the tip

≈ 5 mm12″ from the tail

≈ 17 mm12″ from the nose

≈ 96 mmnose rocker, at the tip

≈ 431 mmflat to within 3 mm, from 32 % to 63 % of the length

50 %of the length to the lowest point, from the tail

≈ 98 mmat its thickest, 53 % from the tail

≈ 32 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 65 L · scaled from the 55 L, borrowed (≈), estimated

≈ 35 mmtail rocker, at the tip

≈ 6 mm12″ from the tail

≈ 19 mm12″ from the nose

≈ 100 mmnose rocker, at the tip

≈ 436 mmflat to within 3 mm, from 32 % to 63 % of the length

50 %of the length to the lowest point, from the tail

≈ 109 mmat its thickest, 53 % from the tail

≈ 33 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 75 L · scaled from the 55 L, borrowed (≈), estimated

≈ 37 mmtail rocker, at the tip

≈ 6 mm12″ from the tail

≈ 21 mm12″ from the nose

≈ 103 mmnose rocker, at the tip

≈ 442 mmflat to within 3 mm, from 33 % to 63 % of the length

50 %of the length to the lowest point, from the tail

≈ 119 mmat its thickest, 53 % from the tail

≈ 34 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 85 L · scaled from the 55 L, borrowed (≈), estimated

≈ 38 mmtail rocker, at the tip

≈ 7 mm12″ from the tail

≈ 23 mm12″ from the nose

≈ 107 mmnose rocker, at the tip

≈ 448 mmflat to within 3 mm, from 33 % to 62 % of the length

50 %of the length to the lowest point, from the tail

≈ 128 mmat its thickest, 53 % from the tail

≈ 35 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 90 L · scaled from the 55 L, borrowed (≈), estimated

≈ 39 mmtail rocker, at the tip

≈ 7 mm12″ from the tail

≈ 24 mm12″ from the nose

≈ 109 mmnose rocker, at the tip

≈ 451 mmflat to within 3 mm, from 33 % to 62 % of the length

50 %of the length to the lowest point, from the tail

≈ 131 mmat its thickest, 53 % from the tail

≈ 36 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 95 L · scaled from the 55 L, borrowed (≈), estimated

≈ 40 mmtail rocker, at the tip

≈ 7 mm12″ from the tail

≈ 25 mm12″ from the nose

≈ 111 mmnose rocker, at the tip

≈ 454 mmflat to within 3 mm, from 33 % to 62 % of the length

50 %of the length to the lowest point, from the tail

≈ 133 mmat its thickest, 53 % from the tail

≈ 36 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 105 L · scaled from the 55 L, borrowed (≈), estimated

≈ 41 mmtail rocker, at the tip

≈ 8 mm12″ from the tail

≈ 27 mm12″ from the nose

≈ 115 mmnose rocker, at the tip

≈ 461 mmflat to within 3 mm, from 34 % to 62 % of the length

50 %of the length to the lowest point, from the tail

≈ 140 mmat its thickest, 53 % from the tail

≈ 37 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 110 L · scaled from the 55 L, borrowed (≈), estimated

≈ 43 mmtail rocker, at the tip

≈ 8 mm12″ from the tail

≈ 30 mm12″ from the nose

≈ 119 mmnose rocker, at the tip

≈ 468 mmflat to within 3 mm, from 34 % to 62 % of the length

50 %of the length to the lowest point, from the tail

≈ 137 mmat its thickest, 53 % from the tail

≈ 39 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 120 L · scaled from the 55 L, borrowed (≈), estimated

≈ 45 mmtail rocker, at the tip

≈ 9 mm12″ from the tail

≈ 32 mm12″ from the nose

≈ 123 mmnose rocker, at the tip

≈ 475 mmflat to within 3 mm, from 34 % to 62 % of the length

50 %of the length to the lowest point, from the tail

≈ 140 mmat its thickest, 53 % from the tail

≈ 40 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 135 L · scaled from the 55 L, borrowed (≈), estimated

≈ 47 mmtail rocker, at the tip

≈ 9 mm12″ from the tail

≈ 35 mm12″ from the nose

≈ 129 mmnose rocker, at the tip

≈ 485 mmflat to within 3 mm, from 35 % to 62 % of the length

50 %of the length to the lowest point, from the tail

≈ 146 mmat its thickest, 53 % from the tail

≈ 42 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 145 L · scaled from the 55 L, borrowed (≈), estimated

≈ 51 mmtail rocker, at the tip

≈ 11 mm12″ from the tail

≈ 41 mm12″ from the nose

≈ 138 mmnose rocker, at the tip

≈ 498 mmflat to within 3 mm, from 35 % to 61 % of the length

50 %of the length to the lowest point, from the tail

≈ 142 mmat its thickest, 53 % from the tail

≈ 44 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 160 L · scaled from the 55 L, borrowed (≈), estimated

≈ 54 mmtail rocker, at the tip

≈ 12 mm12″ from the tail

≈ 46 mm12″ from the nose

≈ 146 mmnose rocker, at the tip

≈ 509 mmflat to within 3 mm, from 36 % to 61 % of the length

50 %of the length to the lowest point, from the tail

≈ 144 mmat its thickest, 53 % from the tail

≈ 47 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · shaded: the middle 80 % of its group · No usable side photo of this board: the median of 90 hard wing boards from 58 product lines. Tail ends set by rule, Claude or a brand convention on their photos, none checked by a person. · estimated