Kite twintip

Cabrinha, 2026

Stylus 2026

1500mm long · 4'11"

450mm wide

≈ 14mm thick · a guess

–litres

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

A fuller nose than most. A square tail, a full nose and parallel rails.

derived · against the 76 other kite twintip boards in the atlas, read off the outlines.

As listed by Cabrinha

Cabrinha Stylus 2026: every size as listed by Cabrinha
sizelengthwidththicknessweight
150 × 45 cm150 cm · 1500 mm450 mm≈ 14 mm · a guess–
160 × 47.5 cm160 cm · 1600 mm475 mm≈ 14 mm · a guess–

Every size side by side, tails on one line, one scale

160015000 mm1500150 × 45 cm450 w1600160 × 47.5 cm475 w

Next to your board?

Lay the Cabrinha Stylus 150 × 45 cm over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Cabrinha Stylus 2026 from above and from the side, every size at true scale, tails aligned
Cabrinha Stylus 2026 from the side, true proportions: the bottom's rocker over a flat table, every size; borrowed (≈), drawn hollow

Read off the 150 × 45 cm outline · derived

60 %wide point, 902 mm from the tail

3.33length over width

429mm wide 12″ from the tail

6,434cm² of planform

Read off the 160 × 47.5 cm outline · derived

60 %wide point, 962 mm from the tail

3.37length over width

451mm wide 12″ from the tail

7,247cm² of planform

Rocker of the 150 × 45 cm · borrowed (≈), estimated

≈ 55 mmtail rocker, at the tip
≈ 18 mm12″ from the tail
≈ 17 mm12″ from the nose
≈ 53 mmnose rocker, at the tip
≈ 355 mmflat to within 3 mm, from 39 % to 62 % of the length
50 %of the length to the lowest point, from the tail
≈ 14 mmat its thickest, 55 % from the tail
≈ 7 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 160 × 47.5 cm · scaled from the 150 × 45 cm, borrowed (≈), estimated

≈ 59 mmtail rocker, at the tip
≈ 21 mm12″ from the tail
≈ 20 mm12″ from the nose
≈ 57 mmnose rocker, at the tip
≈ 365 mmflat to within 3 mm, from 39 % to 62 % of the length
50 %of the length to the lowest point, from the tail
≈ 14 mmat its thickest, 55 % from the tail
≈ 8 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · shaded: the middle 80 % of its group · No usable side photo of this board: the median of 20 twintip boards from 16 product lines. Tail ends set by rule, Claude or a brand convention on their photos, none checked by a person. · estimated

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived