Duotone, 2026

Jaime SLS 2026

1330mm long · 4'4"

400mm wide

≈ 14mm thick · a guess

–litres

Open in Studio See it on duotonesports.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Its width sits further back. A square tail, a full nose and parallel rails.

derived · against the 76 other kite twintip boards in the atlas, read off the outlines.

As listed by Duotone

Duotone Jaime SLS 2026: every size as listed by Duotone
size	length	width	thickness	weight
133 × 40 cm	133 cm · 1330 mm	400 mm	≈ 14 mm · a guess	2.4 kg
136 × 41 cm	136 cm · 1360 mm	410 mm	≈ 14 mm · a guess	2.5 kg
139 × 42 cm	139 cm · 1390 mm	420 mm	≈ 14 mm · a guess	2.6 kg
142 × 43 cm	142 cm · 1420 mm	430 mm	≈ 14 mm · a guess	2.9 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the Duotone Jaime SLS 133 × 40 cm over up to four others, at one scale.

Compare with…

Generations

After it · 2027

The 2027 133 × 40 cm is the same length and width as the 2026 133 × 40 cm. Open the 2027

listed length and width

2026 133 × 40 cm 2027 133 × 40 cm

The Duotone Jaime SLS over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 133 × 40 cm outline · derived

49 %wide point, 655 mm from the tail

3.33length over width

371mm wide 12″ from the tail

4,818cm² of planform

Read off the 136 × 41 cm outline · derived

49 %wide point, 669 mm from the tail

3.32length over width

379mm wide 12″ from the tail

5,050cm² of planform

Read off the 139 × 42 cm outline · derived

49 %wide point, 684 mm from the tail

3.31length over width

387mm wide 12″ from the tail

5,287cm² of planform

Read off the 142 × 43 cm outline · derived

49 %wide point, 699 mm from the tail

3.30length over width

395mm wide 12″ from the tail

5,530cm² of planform

Rocker of the 133 × 40 cm · borrowed (≈), estimated

≈ 49 mmtail rocker, at the tip

≈ 14 mm12″ from the tail

≈ 13 mm12″ from the nose

≈ 47 mmnose rocker, at the tip

≈ 335 mmflat to within 3 mm, from 38 % to 63 % of the length

50 %of the length to the lowest point, from the tail

≈ 14 mmat its thickest, 55 % from the tail

≈ 7 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 136 × 41 cm · scaled from the 133 × 40 cm, borrowed (≈), estimated

≈ 50 mmtail rocker, at the tip

≈ 15 mm12″ from the tail

≈ 13 mm12″ from the nose

≈ 48 mmnose rocker, at the tip

≈ 338 mmflat to within 3 mm, from 38 % to 63 % of the length

50 %of the length to the lowest point, from the tail

≈ 14 mmat its thickest, 55 % from the tail

≈ 7 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 139 × 42 cm · scaled from the 133 × 40 cm, borrowed (≈), estimated

≈ 51 mmtail rocker, at the tip

≈ 15 mm12″ from the tail

≈ 14 mm12″ from the nose

≈ 49 mmnose rocker, at the tip

≈ 341 mmflat to within 3 mm, from 38 % to 63 % of the length

50 %of the length to the lowest point, from the tail

≈ 14 mmat its thickest, 55 % from the tail

≈ 7 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 142 × 43 cm · scaled from the 133 × 40 cm, borrowed (≈), estimated

≈ 52 mmtail rocker, at the tip

≈ 16 mm12″ from the tail

≈ 15 mm12″ from the nose

≈ 50 mmnose rocker, at the tip

≈ 345 mmflat to within 3 mm, from 39 % to 63 % of the length

50 %of the length to the lowest point, from the tail

≈ 14 mmat its thickest, 55 % from the tail

≈ 7 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · shaded: the middle 80 % of its group · No usable side photo of this board: the median of 20 twintip boards from 16 product lines. Tail ends set by rule, Claude or a brand convention on their photos, none checked by a person. · estimated