Gong, 2024

Sizzle Carbon Pro Twin Tip 2024

1400mm long · 4'7"

415mm wide

≈ 14mm thick · a guess

–litres

Open in Studio See it on gong-galaxy.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Its width sits further back. A round tail, a full nose and parallel rails.

derived · against the 76 other kite twintip boards in the atlas, read off the outlines.

As listed by Gong

Gong Sizzle Carbon Pro Twin Tip 2024: every size as listed by Gong
size	length	width	thickness	weight
140 × 41.5 cm	140 cm · 1400 mm	415 mm	≈ 14 mm · a guess	–
144 × 43 cm	144 cm · 1440 mm	430 mm	≈ 14 mm · a guess	–

Every size side by side, tails on one line, one scale

Next to your board?

Lay the Gong Sizzle Carbon Pro Twin Tip 140 × 41.5 cm over up to four others, at one scale.

Compare with…

Generations

After it · 2026

The 2026 140 × 41.5 cm is the same length and width as the 2024 140 × 41.5 cm. Open the 2026

listed length and width

2024 140 × 41.5 cm 2026 140 × 41.5 cm

The Gong Sizzle Carbon Pro Twin Tip over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 140 × 41.5 cm outline · derived

50 %wide point, 693 mm from the tail

3.37length over width

374mm wide 12″ from the tail

5,187cm² of planform

Read off the 144 × 43 cm outline · derived

50 %wide point, 712 mm from the tail

3.35length over width

386mm wide 12″ from the tail

5,528cm² of planform

Rocker of the 140 × 41.5 cm · borrowed (≈), estimated

≈ 30 mmtail rocker, at the tip

≈ 8 mm12″ from the tail

≈ 12 mm12″ from the nose

≈ 42 mmnose rocker, at the tip

≈ 520 mmflat to within 3 mm, from 30 % to 67 % of the length

61 %of the length to the lowest point, from the tail

≈ 14 mmat its thickest, 55 % from the tail

≈ 5 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 144 × 43 cm · scaled from the 140 × 41.5 cm, borrowed (≈), estimated

≈ 30 mmtail rocker, at the tip

≈ 8 mm12″ from the tail

≈ 13 mm12″ from the nose

≈ 43 mmnose rocker, at the tip

≈ 532 mmflat to within 3 mm, from 30 % to 67 % of the length

61 %of the length to the lowest point, from the tail

≈ 14 mmat its thickest, 55 % from the tail

≈ 5 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · shaded: the middle 80 % of its group · Read off Gong's photo of this board, rejected: silhouette 10 px thick along its middle, under 18: too thin for a segmentation mask to read a thickness curve (the mask keeps the dark part of so thin a strip); rocker only. Tail end set by Gong's photo convention, not checked by a person. · estimated