SUP foil

Gong, 2025

SUP Foil Fner EPS Pro 2025

2665mm long · 8'9"

440mm wide

157mm thick

110litres

Open in Studio See it on gong-galaxy.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Its width sits further back. A rounded pin tail, a medium nose and gently curved rails.

derived · against the 47 other sup foil boards in the atlas, read off the outlines.

As listed by Gong

Gong SUP Foil Fner EPS Pro 2025: every size as listed by Gong
sizelengthwidththicknessweight
95 L253.7cm · 2537 mm421 mm149 mm–
110 L266.5cm · 2665 mm440 mm157 mm–
125 L276.7cm · 2767 mm457 mm165 mm–

Every size side by side, tails on one line, one scale

276725370 mm253795 L421 w2665110 L434 w2767125 L457 w

Next to your board?

Lay the Gong SUP Foil Fner EPS Pro 110 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Gong SUP Foil Fner EPS Pro 2025 from above and from the side, every size at true scale, tails aligned
Gong SUP Foil Fner EPS Pro 2025 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 95 L outline · derived

47 %wide point, 1200 mm from the tail

6.03length over width

236mm wide 12″ from the tail

8,301cm² of planform

Read off the 110 L outline · derived

47 %wide point, 1260 mm from the tail

6.13length over width

239mm wide 12″ from the tail

9,004cm² of planform

Read off the 125 L outline · derived

47 %wide point, 1309 mm from the tail

6.05length over width

248mm wide 12″ from the tail

9,839cm² of planform

Rocker of the 95 L · scaled from the 110 L measured

75 mmtail rocker, at the tip
39 mm12″ from the tail
28 mm12″ from the nose
102 mmnose rocker, at the tip
1102 mmflat to within 3 mm, from 26 % to 69 % of the length
39 %of the length to the lowest point, from the tail
155 mmat its thickest, 38 % from the tail
34 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 110 L · measured

79 mmtail rocker, at the tip
43 mm12″ from the tail
32 mm12″ from the nose
107 mmnose rocker, at the tip
1146 mmflat to within 3 mm, from 26 % to 69 % of the length
39 %of the length to the lowest point, from the tail
164 mmat its thickest, 38 % from the tail · on the photo; Gong lists 157 mm
36 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 125 L · scaled from the 110 L measured

83 mmtail rocker, at the tip
45 mm12″ from the tail
34 mm12″ from the nose
111 mmnose rocker, at the tip
1181 mmflat to within 3 mm, from 26 % to 69 % of the length
39 %of the length to the lowest point, from the tail
172 mmat its thickest, 38 % from the tail
37 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on Gong's photo of the 110 L. Tail end set by Gong's photo convention, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived