Downwind foil

JP Australia, 2026

Downwind S-TEC 2026

2480mm long · 8'2"

495mm wide

155mm thick

130litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Longer and leaner than most. A rounded pin tail, a medium nose and curvy rails.

derived · against the 66 other downwind foil boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia Downwind S-TEC 2026: every size as listed by JP Australia
sizelengthwidththicknessweight
130 L248 cm · 2480 mm495 mm155 mm5.9 kg

Next to your board?

Lay the JP Australia Downwind S-TEC 130 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia Downwind S-TEC 2026 from above and from the side, every size at true scale, tails aligned
JP Australia Downwind S-TEC 2026 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 130 L outline · derived

54 %wide point, 1327 mm from the tail

5.06length over width

305mm wide 12″ from the tail

9,508cm² of planform

Rocker of the 130 L · measured

92 mmtail rocker, at the tip
36 mm12″ from the tail
35 mm12″ from the nose
116 mmnose rocker, at the tip
596 mmflat to within 3 mm, from 39 % to 63 % of the length
48 %of the length to the lowest point, from the tail
165 mmat its thickest, 41 % from the tail · on the photo; JP Australia lists 155 mm
68 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 130 L. Tail end set by rule.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived