Wing foil

JP Australia, 2025

M-Winger 2025

2030mm long · 6'8"

560mm wide

135mm thick

105litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Longer and leaner than most. A rounded pin tail, a medium nose and gently curved rails.

derived · against the 225 other wing foil boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia M-Winger 2025: every size as listed by JP Australia
sizelengthwidththicknessweight
105 L203 cm · 2030 mm560 mm135 mm6.4 kg
120 L213 cm · 2130 mm580 mm141 mm6.9 kg
135 L221 cm · 2210 mm610 mm141 mm7.3 kg

Every size side by side, tails on one line, one scale

221020300 mm2030105 L550 w2130120 L580 w2210135 L610 w

Next to your board?

Lay the JP Australia M-Winger 105 L over up to four others, at one scale.

Compare with…

Generations

After it · 2026

The 2026 105 L is the same length and width as the 2025 105 L. Open the 2026

listed length and width

2025 105 L over the 2026 105 L, tails aligned, one scale
2025 105 L 2026 105 L

The JP Australia M-Winger over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia M-Winger 2025 from above and from the side, every size at true scale, tails aligned
JP Australia M-Winger 2025 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 105 L outline · derived

54 %wide point, 1098 mm from the tail

3.69length over width

399mm wide 12″ from the tail

8,909cm² of planform

Read off the 120 L outline · derived

54 %wide point, 1152 mm from the tail

3.67length over width

414mm wide 12″ from the tail

9,858cm² of planform

Read off the 135 L outline · derived

54 %wide point, 1196 mm from the tail

3.62length over width

430mm wide 12″ from the tail

10,758cm² of planform

Rocker of the 105 L · measured

72 mmtail rocker, at the tip
34 mm12″ from the tail
12 mm12″ from the nose
84 mmnose rocker, at the tip
567 mmflat to within 3 mm, from 39 % to 67 % of the length
48 %of the length to the lowest point, from the tail
150 mmat its thickest, 34 % from the tail · on the photo; JP Australia lists 135 mm
34 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 120 L · scaled from the 105 L measured

75 mmtail rocker, at the tip
39 mm12″ from the tail
14 mm12″ from the nose
89 mmnose rocker, at the tip
577 mmflat to within 3 mm, from 40 % to 67 % of the length
48 %of the length to the lowest point, from the tail
157 mmat its thickest, 34 % from the tail
35 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 135 L · scaled from the 105 L measured

78 mmtail rocker, at the tip
42 mm12″ from the tail
16 mm12″ from the nose
92 mmnose rocker, at the tip
587 mmflat to within 3 mm, from 40 % to 67 % of the length
48 %of the length to the lowest point, from the tail
157 mmat its thickest, 34 % from the tail
37 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 105 L. Tail end set by Claude, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived