Gong, 2026

SUP Inflatable I-SUP Cruising 2026

3812mm long · 12'6"

838mm wide

152mm thick

360litres

Open in Studio See it on gong-galaxy.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Its width sits further back. A rounded pin tail, a pointed nose and curvy rails.

derived · against the 157 other sup boards in the atlas, read off the outlines.

As listed by Gong

Gong SUP Inflatable I-SUP Cruising 2026: every size as listed by Gong
size	length	width	thickness	weight
290 L	320.0cm · 3200 mm	787 mm	152 mm	–
320 L	350.5cm · 3505 mm	813 mm	152 mm	–
360 L	381.2cm · 3812 mm	838 mm	152 mm	–
410 L	411.5cm · 4115 mm	889 mm	152 mm	–

Every size side by side, tails on one line, one scale

Next to your board?

Lay the Gong SUP Inflatable I-SUP Cruising 360 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 290 L outline · derived

52 %wide point, 1675 mm from the tail

4.02length over width

522mm wide 12″ from the tail

19,899cm² of planform

Read off the 320 L outline · derived

49 %wide point, 1725 mm from the tail

4.31length over width

479mm wide 12″ from the tail

21,964cm² of planform

Read off the 360 L outline · derived

49 %wide point, 1876 mm from the tail

4.58length over width

476mm wide 12″ from the tail

24,455cm² of planform

Read off the 410 L outline · derived

50 %wide point, 2064 mm from the tail

4.63length over width

504mm wide 12″ from the tail

28,220cm² of planform

Rocker of the 290 L · scaled from the 360 L measured

53 mmtail rocker, at the tip

16 mm12″ from the tail

46 mm12″ from the nose

103 mmnose rocker, at the tip

835 mmflat to within 3 mm, from 32 % to 58 % of the length

48 %of the length to the lowest point, from the tail

171 mmat its thickest, 18 % from the tail

57 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 320 L · scaled from the 360 L measured

60 mmtail rocker, at the tip

18 mm12″ from the tail

52 mm12″ from the nose

115 mmnose rocker, at the tip

868 mmflat to within 3 mm, from 33 % to 58 % of the length

48 %of the length to the lowest point, from the tail

171 mmat its thickest, 18 % from the tail

62 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 360 L · measured

66 mmtail rocker, at the tip

21 mm12″ from the tail

61 mm12″ from the nose

126 mmnose rocker, at the tip

894 mmflat to within 3 mm, from 34 % to 57 % of the length

48 %of the length to the lowest point, from the tail

171 mmat its thickest, 18 % from the tail · on the photo; Gong lists 152 mm

67 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 410 L · scaled from the 360 L measured

73 mmtail rocker, at the tip

23 mm12″ from the tail

69 mm12″ from the nose

137 mmnose rocker, at the tip

919 mmflat to within 3 mm, from 35 % to 57 % of the length

48 %of the length to the lowest point, from the tail

171 mmat its thickest, 18 % from the tail

73 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on Gong's photo of the 360 L. Tail end set by Gong's photo convention, not checked by a person.