Surf foil

Gong, 2024

Surf Foil Intruder EPS Pro 2024

2030mm long · 6'8"

432mm wide

106mm thick

71litres

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Longer and leaner than most. A pin tail, a medium nose and curvy rails.

derived · against the 77 other surf foil boards in the atlas, read off the outlines.

As listed by Gong

Gong Surf Foil Intruder EPS Pro 2024: every size as listed by Gong
sizelengthwidththicknessweight
51 L173.0cm · 1730 mm432 mm103 mm · medium confidence–
71 L203.0cm · 2030 mm432 mm106 mm · estimated–
94 L234.0cm · 2340 mm432 mm141 mm · medium confidence–

Every size side by side, tails on one line, one scale

234017300 mm173051 L432 w203071 L428 w234094 L431 w

Next to your board?

Lay the Gong Surf Foil Intruder EPS Pro 71 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Gong Surf Foil Intruder EPS Pro 2024 from above and from the side, every size at true scale, tails aligned
Gong Surf Foil Intruder EPS Pro 2024 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 51 L outline · derived

53 %wide point, 916 mm from the tail

4.01length over width

300mm wide 12″ from the tail

5,676cm² of planform

Read off the 71 L outline · derived

53 %wide point, 1075 mm from the tail

4.74length over width

273mm wide 12″ from the tail

6,603cm² of planform

Read off the 94 L outline · derived

53 %wide point, 1234 mm from the tail

5.42length over width

255mm wide 12″ from the tail

7,678cm² of planform

Rocker of the 51 L · scaled from the 71 L measured

15 mmtail rocker, at the tip
6 mm12″ from the tail
22 mm12″ from the nose
97 mmnose rocker, at the tip
643 mmflat to within 3 mm, from 25 % to 62 % of the length
42 %of the length to the lowest point, from the tail
121 mmat its thickest, 56 % from the tail
19 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 71 L · measured

18 mmtail rocker, at the tip
8 mm12″ from the tail
32 mm12″ from the nose
115 mmnose rocker, at the tip
708 mmflat to within 3 mm, from 27 % to 61 % of the length
42 %of the length to the lowest point, from the tail
125 mmat its thickest, 56 % from the tail · on the photo; Gong lists 106 mm
22 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 94 L · scaled from the 71 L measured

20 mmtail rocker, at the tip
10 mm12″ from the tail
44 mm12″ from the nose
134 mmnose rocker, at the tip
770 mmflat to within 3 mm, from 28 % to 61 % of the length
42 %of the length to the lowest point, from the tail
166 mmat its thickest, 56 % from the tail
25 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on Gong's photo of the 71 L. Tail end set by Gong's photo convention, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived