Wing foil

Gong, 2024

Wing Foil Lethal FSP Pro 2024

1372mm long · 4'6"

540mm wide

133mm thick

65litres

Open in Studio See it on gong-galaxy.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

A finer nose than most. A rounded pin tail, a medium nose and gently curved rails.

derived · against the 169 other wing foil boards in the atlas, read off the outlines.

As listed by Gong

Gong Wing Foil Lethal FSP Pro 2024: every size as listed by Gong
sizelengthwidththicknessweight
35 L129.5cm · 1295 mm491 mm86 mm–
45 L132.0cm · 1320 mm500 mm106 mm–
55 L134.6cm · 1346 mm521 mm118 mm–
65 L137.2cm · 1372 mm540 mm133 mm–
75 L142.2cm · 1422 mm560 mm138 mm–
85 L147.3cm · 1473 mm579 mm148 mm–
95 L154.9cm · 1549 mm600 mm152 mm–
105 L160.0cm · 1600 mm621 mm157 mm–
120 L167.6cm · 1676 mm649 mm165 mm–

Every size side by side, tails on one line, one scale

167612950 mm129535 L491 w132045 L500 w134655 L521 w137265 L538 w142275 L560 w147385 L579 w154995 L600 w1600105 L621 w1676120 L649 w

Next to your board?

Lay the Gong Wing Foil Lethal FSP Pro 65 L over up to four others, at one scale.

Compare with…

Generations

After it · 2025

The 2025 50 L is 102 mm longer than the 2024 45 L, same width; its wide point moved 22 mm toward the nose. Open the 2025

listed length and width · wide point derived

2024 45 L over the 2025 50 L, tails aligned, one scale
2024 45 L 2025 50 L

The Gong Wing Foil Lethal FSP Pro over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Gong Wing Foil Lethal FSP Pro 2024 from above and from the side, every size at true scale, tails aligned
Gong Wing Foil Lethal FSP Pro 2024 from the side, true proportions: the bottom's rocker over a flat table, every size; borrowed (≈), drawn hollow

Read off the 35 L outline · derived

53 %wide point, 684 mm from the tail

2.64length over width

436mm wide 12″ from the tail

5,150cm² of planform

Read off the 45 L outline · derived

53 %wide point, 697 mm from the tail

2.64length over width

443mm wide 12″ from the tail

5,352cm² of planform

Read off the 55 L outline · derived

53 %wide point, 711 mm from the tail

2.58length over width

459mm wide 12″ from the tail

5,682cm² of planform

Read off the 65 L outline · derived

53 %wide point, 724 mm from the tail

2.55length over width

472mm wide 12″ from the tail

5,982cm² of planform

Read off the 75 L outline · derived

53 %wide point, 751 mm from the tail

2.54length over width

487mm wide 12″ from the tail

6,460cm² of planform

Read off the 85 L outline · derived

53 %wide point, 778 mm from the tail

2.54length over width

499mm wide 12″ from the tail

6,919cm² of planform

Read off the 95 L outline · derived

53 %wide point, 818 mm from the tail

2.58length over width

510mm wide 12″ from the tail

7,536cm² of planform

Read off the 105 L outline · derived

53 %wide point, 845 mm from the tail

2.58length over width

523mm wide 12″ from the tail

8,051cm² of planform

Read off the 120 L outline · derived

53 %wide point, 885 mm from the tail

2.58length over width

540mm wide 12″ from the tail

8,822cm² of planform

Rocker of the 35 L · scaled from the 65 L, borrowed (≈), estimated

≈ 8 mmtail rocker, at the tip
≈ 2 mm12″ from the tail
≈ 19 mm12″ from the nose
≈ 109 mmnose rocker, at the tip
≈ 575 mmflat to within 3 mm, from 18 % to 62 % of the length
42 %of the length to the lowest point, from the tail
≈ 86 mmat its thickest, 73 % from the tail
≈ 29 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 45 L · scaled from the 65 L, borrowed (≈), estimated

≈ 8 mmtail rocker, at the tip
≈ 2 mm12″ from the tail
≈ 20 mm12″ from the nose
≈ 111 mmnose rocker, at the tip
≈ 582 mmflat to within 3 mm, from 18 % to 62 % of the length
42 %of the length to the lowest point, from the tail
≈ 106 mmat its thickest, 73 % from the tail
≈ 30 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 55 L · scaled from the 65 L, borrowed (≈), estimated

≈ 9 mmtail rocker, at the tip
≈ 2 mm12″ from the tail
≈ 21 mm12″ from the nose
≈ 113 mmnose rocker, at the tip
≈ 588 mmflat to within 3 mm, from 18 % to 62 % of the length
42 %of the length to the lowest point, from the tail
≈ 117 mmat its thickest, 73 % from the tail
≈ 31 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 65 L · borrowed (≈), estimated

≈ 9 mmtail rocker, at the tip
≈ 2 mm12″ from the tail
≈ 23 mm12″ from the nose
≈ 116 mmnose rocker, at the tip
≈ 595 mmflat to within 3 mm, from 19 % to 62 % of the length
42 %of the length to the lowest point, from the tail
≈ 133 mmat its thickest, 73 % from the tail
≈ 31 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 75 L · scaled from the 65 L, borrowed (≈), estimated

≈ 9 mmtail rocker, at the tip
≈ 2 mm12″ from the tail
≈ 25 mm12″ from the nose
≈ 120 mmnose rocker, at the tip
≈ 608 mmflat to within 3 mm, from 19 % to 62 % of the length
42 %of the length to the lowest point, from the tail
≈ 138 mmat its thickest, 73 % from the tail
≈ 32 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 85 L · scaled from the 65 L, borrowed (≈), estimated

≈ 10 mmtail rocker, at the tip
≈ 3 mm12″ from the tail
≈ 28 mm12″ from the nose
≈ 125 mmnose rocker, at the tip
≈ 621 mmflat to within 3 mm, from 19 % to 62 % of the length
42 %of the length to the lowest point, from the tail
≈ 148 mmat its thickest, 73 % from the tail
≈ 33 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 95 L · scaled from the 65 L, borrowed (≈), estimated

≈ 10 mmtail rocker, at the tip
≈ 3 mm12″ from the tail
≈ 32 mm12″ from the nose
≈ 132 mmnose rocker, at the tip
≈ 637 mmflat to within 3 mm, from 20 % to 61 % of the length
42 %of the length to the lowest point, from the tail
≈ 152 mmat its thickest, 73 % from the tail
≈ 35 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 105 L · scaled from the 65 L, borrowed (≈), estimated

≈ 11 mmtail rocker, at the tip
≈ 3 mm12″ from the tail
≈ 34 mm12″ from the nose
≈ 136 mmnose rocker, at the tip
≈ 648 mmflat to within 3 mm, from 21 % to 61 % of the length
42 %of the length to the lowest point, from the tail
≈ 157 mmat its thickest, 73 % from the tail
≈ 36 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 120 L · scaled from the 65 L, borrowed (≈), estimated

≈ 11 mmtail rocker, at the tip
≈ 4 mm12″ from the tail
≈ 39 mm12″ from the nose
≈ 143 mmnose rocker, at the tip
≈ 667 mmflat to within 3 mm, from 21 % to 61 % of the length
42 %of the length to the lowest point, from the tail
≈ 165 mmat its thickest, 73 % from the tail
≈ 38 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · No usable side photo of this board: from Gong's photo of the Wing Foil Lethal FSP Pro 2025, the same line with other dimensions, a year later. Tail end set by Gong's photo convention on the Wing Foil Lethal FSP Pro 2025's photo, not checked by a person. · estimated

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived