Stand-up paddle

JP Australia, 2023

CruisAir SE 3DS 2023

3500mm long · 11'6"

760mm wide

152mm thick

311litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Its width sits further back. A round tail, a pointed nose and curvy rails.

derived · against the 303 other sup boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia CruisAir SE 3DS 2023: every size as listed by JP Australia
sizelengthwidththicknessweight
311 L350 cm · 3500 mm760 mm152 mm10.2 kg
333 L381 cm · 3810 mm810 mm152 mm11 kg

Every size side by side, tails on one line, one scale

381035000 mm3500311 L779 w3810333 L810 w

Next to your board?

Lay the JP Australia CruisAir SE 3DS 311 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia CruisAir SE 3DS 2023 from above and from the side, every size at true scale, tails aligned
JP Australia CruisAir SE 3DS 2023 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 311 L outline · derived

46 %wide point, 1591 mm from the tail

4.50length over width

478mm wide 12″ from the tail

20,947cm² of planform

Read off the 333 L outline · derived

46 %wide point, 1732 mm from the tail

4.70length over width

486mm wide 12″ from the tail

23,722cm² of planform

Rocker of the 311 L · measured

67 mmtail rocker, at the tip
7 mm12″ from the tail
42 mm12″ from the nose
137 mmnose rocker, at the tip
1594 mmflat to within 3 mm, from 23 % to 68 % of the length
27 %of the length to the lowest point, from the tail
218 mmat its thickest, 12 % from the tail · on the photo; JP Australia lists 152 mm
79 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 333 L · scaled from the 311 L measured

74 mmtail rocker, at the tip
14 mm12″ from the tail
48 mm12″ from the nose
151 mmnose rocker, at the tip
1702 mmflat to within 3 mm, from 23 % to 68 % of the length
27 %of the length to the lowest point, from the tail
218 mmat its thickest, 12 % from the tail
86 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 311 L. Tail end set by Claude, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived