SUP foil

JP Australia, 2020

Foil Slate 2020

2340mm long · 7'8"

740mm wide

106mm thick

111litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

A fuller nose than most. A rounded pin tail, a full nose and gently curved rails.

derived · against the 61 other sup foil boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia Foil Slate 2020: every size as listed by JP Australia
sizelengthwidththicknessweight
111 L234 cm · 2340 mm740 mm106 mm8.5 kg
128 L248 cm · 2480 mm760 mm113 mm8.9 kg
145 L269 cm · 2690 mm790 mm113 mm10.2 kg

Every size side by side, tails on one line, one scale

269023400 mm2340111 L736 w2480128 L760 w2690145 L790 w

Next to your board?

Lay the JP Australia Foil Slate 111 L over up to four others, at one scale.

Compare with…

Generations

After it · 2021

The 2021 112 L is 20 mm longer than the 2020 111 L, same width; its wide point moved 108 mm toward the tail. Open the 2021

listed length and width · wide point derived

2020 111 L over the 2021 112 L, tails aligned, one scale
2020 111 L 2021 112 L

The JP Australia Foil Slate over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia Foil Slate 2020 from above and from the side, every size at true scale, tails aligned
JP Australia Foil Slate 2020 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 111 L outline · derived

54 %wide point, 1268 mm from the tail

3.18length over width

519mm wide 12″ from the tail

14,239cm² of planform

Read off the 128 L outline · derived

54 %wide point, 1343 mm from the tail

3.26length over width

525mm wide 12″ from the tail

15,594cm² of planform

Read off the 145 L outline · derived

54 %wide point, 1457 mm from the tail

3.41length over width

531mm wide 12″ from the tail

17,582cm² of planform

Rocker of the 111 L · measured

69 mmtail rocker, at the tip
36 mm12″ from the tail
57 mm12″ from the nose
141 mmnose rocker, at the tip
422 mmflat to within 3 mm, from 42 % to 60 % of the length
48 %of the length to the lowest point, from the tail
116 mmat its thickest, 52 % from the tail · on the photo; JP Australia lists 106 mm
27 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 128 L · scaled from the 111 L measured

74 mmtail rocker, at the tip
40 mm12″ from the tail
64 mm12″ from the nose
149 mmnose rocker, at the tip
433 mmflat to within 3 mm, from 42 % to 60 % of the length
48 %of the length to the lowest point, from the tail
123 mmat its thickest, 52 % from the tail
29 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 145 L · scaled from the 111 L measured

80 mmtail rocker, at the tip
46 mm12″ from the tail
74 mm12″ from the nose
163 mmnose rocker, at the tip
450 mmflat to within 3 mm, from 43 % to 59 % of the length
48 %of the length to the lowest point, from the tail
123 mmat its thickest, 52 % from the tail
31 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 111 L. Tail end set by Claude, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived