SUP foil

JP Australia, 2026

Foil Slate IPR 2026

2360mm long · 7'9"

740mm wide

106mm thick

112litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

A fuller nose than most. A rounded pin tail, a full nose and gently curved rails.

derived · against the 47 other sup foil boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia Foil Slate IPR 2026: every size as listed by JP Australia
sizelengthwidththicknessweight
112 L236 cm · 2360 mm740 mm106 mm8.5 kg
128 L249 cm · 2490 mm760 mm113 mm9.6 kg
145 L269 cm · 2690 mm790 mm115 mm10.2 kg

Every size side by side, tails on one line, one scale

269023600 mm2360112 L723 w2490128 L760 w2690145 L790 w

Next to your board?

Lay the JP Australia Foil Slate IPR 112 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia Foil Slate IPR 2026 from above and from the side, every size at true scale, tails aligned
JP Australia Foil Slate IPR 2026 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 112 L outline · derived

49 %wide point, 1161 mm from the tail

3.26length over width

513mm wide 12″ from the tail

14,162cm² of planform

Read off the 128 L outline · derived

49 %wide point, 1225 mm from the tail

3.28length over width

529mm wide 12″ from the tail

15,698cm² of planform

Read off the 145 L outline · derived

49 %wide point, 1324 mm from the tail

3.41length over width

535mm wide 12″ from the tail

17,628cm² of planform

Rocker of the 112 L · measured

78 mmtail rocker, at the tip
42 mm12″ from the tail
51 mm12″ from the nose
126 mmnose rocker, at the tip
521 mmflat to within 3 mm, from 41 % to 63 % of the length
53 %of the length to the lowest point, from the tail
122 mmat its thickest, 51 % from the tail · on the photo; JP Australia lists 106 mm
26 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 128 L · scaled from the 112 L measured

82 mmtail rocker, at the tip
45 mm12″ from the tail
56 mm12″ from the nose
134 mmnose rocker, at the tip
541 mmflat to within 3 mm, from 41 % to 63 % of the length
53 %of the length to the lowest point, from the tail
130 mmat its thickest, 51 % from the tail
27 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 145 L · scaled from the 112 L measured

89 mmtail rocker, at the tip
51 mm12″ from the tail
64 mm12″ from the nose
145 mmnose rocker, at the tip
571 mmflat to within 3 mm, from 41 % to 63 % of the length
53 %of the length to the lowest point, from the tail
132 mmat its thickest, 51 % from the tail
29 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 112 L. Tail end set by rule.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived