SUP foil

JP Australia, 2020

Foil 2020

2030mm long · 6'8"

660mm wide

113mm thick

96litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

More tail than most. A rounded pin tail, a full nose and gently curved rails.

derived · against the 61 other sup foil boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia Foil 2020: every size as listed by JP Australia
sizelengthwidththicknessweight
96 L203 cm · 2030 mm660 mm113 mm · medium confidence6.9 kg
115 L213 cm · 2130 mm710 mm113 mm7.8 kg
126 L216 cm · 2160 mm730 mm117 mm8.2 kg

Every size side by side, tails on one line, one scale

216020300 mm203096 L664 w2130115 L710 w2160126 L730 w

Next to your board?

Lay the JP Australia Foil 96 L over up to four others, at one scale.

Compare with…

Generations

After it · 2021

The 2021 96 L is the same length and width as the 2020 96 L; its wide point moved 30 mm toward the nose. Open the 2021

listed length and width · wide point derived

2020 96 L over the 2021 96 L, tails aligned, one scale
2020 96 L 2021 96 L

The JP Australia Foil over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia Foil 2020 from above and from the side, every size at true scale, tails aligned
JP Australia Foil 2020 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 96 L outline · derived

53 %wide point, 1075 mm from the tail

3.06length over width

500mm wide 12″ from the tail

11,141cm² of planform

Read off the 115 L outline · derived

53 %wide point, 1128 mm from the tail

3.00length over width

529mm wide 12″ from the tail

12,495cm² of planform

Read off the 126 L outline · derived

53 %wide point, 1144 mm from the tail

2.96length over width

542mm wide 12″ from the tail

13,028cm² of planform

Rocker of the 96 L · measured

97 mmtail rocker, at the tip
30 mm12″ from the tail
35 mm12″ from the nose
120 mmnose rocker, at the tip
419 mmflat to within 3 mm, from 42 % to 63 % of the length
50 %of the length to the lowest point, from the tail
119 mmat its thickest, 41 % from the tail · on the photo; JP Australia lists 113 mm
33 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 115 L · scaled from the 96 L measured

102 mmtail rocker, at the tip
32 mm12″ from the tail
38 mm12″ from the nose
126 mmnose rocker, at the tip
426 mmflat to within 3 mm, from 43 % to 63 % of the length
50 %of the length to the lowest point, from the tail
119 mmat its thickest, 41 % from the tail
35 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 126 L · scaled from the 96 L measured

104 mmtail rocker, at the tip
33 mm12″ from the tail
39 mm12″ from the nose
128 mmnose rocker, at the tip
428 mmflat to within 3 mm, from 43 % to 62 % of the length
50 %of the length to the lowest point, from the tail
123 mmat its thickest, 41 % from the tail
35 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 96 L. Tail end set by Claude, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived