JP Australia, 2020

Funster 2020

2600mm long · 8'6"

900mm wide

≈ 128mm thick · medium confidence

170litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Shorter and fuller than most. A rounded pin tail, a full nose and gently curved rails.

derived · against the 244 other windsurf boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia Funster 2020: every size as listed by JP Australia
size	length	width	thickness	weight
170 L	260 cm · 2600 mm	900 mm	128 mm · medium confidence	13.2 kg
200 L	270 cm · 2700 mm	950 mm	≈ 137 mm · estimated	14.8 kg
240 L	282 cm · 2820 mm	1010 mm	≈ 148 mm · estimated	16.7 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the JP Australia Funster 170 L over up to four others, at one scale.

Compare with…

Generations

After it · 2021

The 2021 170 L is the same length and width as the 2020 170 L; its wide point moved 39 mm toward the tail. Open the 2021

listed length and width · wide point derived

2020 170 L 2021 170 L

The JP Australia Funster over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 170 L outline · derived

56 %wide point, 1456 mm from the tail

2.91length over width

605mm wide 12″ from the tail

18,949cm² of planform

Read off the 200 L outline · derived

56 %wide point, 1512 mm from the tail

2.84length over width

634mm wide 12″ from the tail

20,905cm² of planform

Read off the 240 L outline · derived

56 %wide point, 1579 mm from the tail

2.79length over width

665mm wide 12″ from the tail

23,213cm² of planform

Rocker of the 170 L · measured

20 mmtail rocker, at the tip

16 mm12″ from the tail

66 mm12″ from the nose

164 mmnose rocker, at the tip

621 mmflat to within 3 mm, from 35 % to 58 % of the length

50 %of the length to the lowest point, from the tail

128 mmat its thickest, 40 % from the tail

27 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 200 L · scaled from the 170 L measured

20 mmtail rocker, at the tip

16 mm12″ from the tail

71 mm12″ from the nose

170 mmnose rocker, at the tip

628 mmflat to within 3 mm, from 35 % to 58 % of the length

50 %of the length to the lowest point, from the tail

137 mmat its thickest, 40 % from the tail

28 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 240 L · scaled from the 170 L measured

21 mmtail rocker, at the tip

17 mm12″ from the tail

77 mm12″ from the nose

178 mmnose rocker, at the tip

625 mmflat to within 3 mm, from 35 % to 57 % of the length

50 %of the length to the lowest point, from the tail

148 mmat its thickest, 40 % from the tail

29 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 170 L. Tail end set by Claude, not checked by a person.