JP Australia, 2021

Funster 2021

2600mm long · 8'6"

900mm wide

≈ 125mm thick · medium confidence

170litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

The 2020 outline, refined. The 170 L is the same length and width as the 2020 170 L.

170 L against the 2020 170 L, listed length and width.

As listed by JP Australia

JP Australia Funster 2021: every size as listed by JP Australia
size	length	width	thickness	weight
170 L	260 cm · 2600 mm	900 mm	125 mm · medium confidence	13.1 kg
200 L	270 cm · 2700 mm	950 mm	≈ 134 mm · estimated	14.6 kg
240 L	282 cm · 2820 mm	1000 mm	≈ 147 mm · estimated	16.6 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the JP Australia Funster 170 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2020

The 2021 170 L is the same length and width as the 2020 170 L; its wide point moved 39 mm toward the tail. Open the 2020

listed length and width · wide point derived

2021 170 L 2020 170 L

After it · 2022

The 2022 170 L is the same length and width as the 2021 170 L; its wide point moved 42 mm toward the tail. Open the 2022

listed length and width · wide point derived

2021 170 L 2022 170 L

The JP Australia Funster over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 170 L outline · derived

55 %wide point, 1417 mm from the tail

2.91length over width

605mm wide 12″ from the tail

18,932cm² of planform

Read off the 200 L outline · derived

55 %wide point, 1472 mm from the tail

2.84length over width

633mm wide 12″ from the tail

20,870cm² of planform

Read off the 240 L outline · derived

55 %wide point, 1537 mm from the tail

2.82length over width

656mm wide 12″ from the tail

22,945cm² of planform

Rocker of the 170 L · measured

25 mmtail rocker, at the tip

18 mm12″ from the tail

61 mm12″ from the nose

158 mmnose rocker, at the tip

581 mmflat to within 3 mm, from 39 % to 61 % of the length

48 %of the length to the lowest point, from the tail

125 mmat its thickest, 42 % from the tail

26 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 200 L · scaled from the 170 L measured

26 mmtail rocker, at the tip

19 mm12″ from the tail

66 mm12″ from the nose

164 mmnose rocker, at the tip

592 mmflat to within 3 mm, from 39 % to 61 % of the length

48 %of the length to the lowest point, from the tail

134 mmat its thickest, 42 % from the tail

27 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 240 L · scaled from the 170 L measured

27 mmtail rocker, at the tip

21 mm12″ from the tail

72 mm12″ from the nose

172 mmnose rocker, at the tip

604 mmflat to within 3 mm, from 39 % to 61 % of the length

48 %of the length to the lowest point, from the tail

147 mmat its thickest, 42 % from the tail

29 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 170 L. Tail end set by Claude, not checked by a person.