JP Australia, 2023

MonstAir SE 3DS 2023

5180mm long · 17'0"

1650mm wide

152mm thick

1100litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Shorter and fuller than most. A square tail, a full nose and parallel rails.

derived · against the 303 other sup boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia MonstAir SE 3DS 2023: every size as listed by JP Australia
size	length	width	thickness	weight
1100 L	518 cm · 5180 mm	1650 mm	152 mm	33.4 kg

Next to your board?

Lay the JP Australia MonstAir SE 3DS 1100 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 1100 L outline · derived

51 %wide point, 2651 mm from the tail

3.13length over width

1098mm wide 12″ from the tail

72,872cm² of planform

Rocker of the 1100 L · borrowed (≈), estimated

≈ 76 mmtail rocker, at the tip

≈ 21 mm12″ from the tail

≈ 69 mm12″ from the nose

≈ 173 mmnose rocker, at the tip

≈ 1989 mmflat to within 3 mm, from 30 % to 69 % of the length

48 %of the length to the lowest point, from the tail

≈ 152 mmat its thickest, 44 % from the tail

≈ 78 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · shaded: the middle 80 % of its group · No usable side photo of this board: the median of 55 inflatable SUP boards from 45 product lines. Tail ends set by rule, Claude or a brand convention on their photos, none checked by a person. · estimated