JP Australia, 2024

Outback SD 2024

3650mm long · 12'0"

830mm wide

174mm thick

295litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Its width sits further back. A square tail, a medium nose and gently curved rails.

derived · against the 303 other sup boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia Outback SD 2024: every size as listed by JP Australia
size	length	width	thickness	weight
295 L	365 cm · 3650 mm	830 mm	174 mm	16.2 kg

Next to your board?

Lay the JP Australia Outback SD 295 L over up to four others, at one scale.

Compare with…

Generations

After it · 2025

The 2025 295 L is the same length and width as the 2024 295 L. Open the 2025

listed length and width

2024 295 L 2025 295 L

The JP Australia Outback SD over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 295 L outline · derived

46 %wide point, 1682 mm from the tail

4.36length over width

535mm wide 12″ from the tail

25,099cm² of planform

Rocker of the 295 L · borrowed (≈), estimated

≈ 103 mmtail rocker, at the tip

≈ 63 mm12″ from the tail

≈ 90 mm12″ from the nose

≈ 173 mmnose rocker, at the tip

≈ 723 mmflat to within 3 mm, from 39 % to 59 % of the length

48 %of the length to the lowest point, from the tail

≈ 174 mmat its thickest, 51 % from the tail

≈ 32 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · shaded: the middle 80 % of its group · No usable side photo of this board: the median of 59 hard SUP boards from 41 product lines. Tail ends set by rule, Claude or a brand convention on their photos, none checked by a person. · estimated