Wing foil

JP Australia, 2024

R-Winger Pro 2024

1650mm long · 5'5"

560mm wide

118mm thick

80litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

More tail than most. A round tail, a medium nose and parallel rails.

derived · against the 225 other wing foil boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia R-Winger Pro 2024: every size as listed by JP Australia
sizelengthwidththicknessweight
65 L152 cm · 1520 mm530 mm112 mm4.8 kg
80 L165 cm · 1650 mm560 mm118 mm5.4 kg
95 L183 cm · 1830 mm580 mm122 mm6.1 kg

Every size side by side, tails on one line, one scale

183015200 mm152065 L530 w165080 L558 w183095 L580 w

Next to your board?

Lay the JP Australia R-Winger Pro 80 L over up to four others, at one scale.

Compare with…

Generations

After it · 2025

The 2025 80 L is the same length and width as the 2024 80 L. Open the 2025

listed length and width

2024 80 L over the 2025 80 L, tails aligned, one scale
2024 80 L 2025 80 L

The JP Australia R-Winger Pro over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia R-Winger Pro 2024 from above and from the side, every size at true scale, tails aligned
JP Australia R-Winger Pro 2024 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 65 L outline · derived

53 %wide point, 809 mm from the tail

2.87length over width

454mm wide 12″ from the tail

6,788cm² of planform

Read off the 80 L outline · derived

53 %wide point, 879 mm from the tail

2.96length over width

470mm wide 12″ from the tail

7,754cm² of planform

Read off the 95 L outline · derived

53 %wide point, 975 mm from the tail

3.16length over width

480mm wide 12″ from the tail

8,943cm² of planform

Rocker of the 65 L · scaled from the 80 L measured

33 mmtail rocker, at the tip
16 mm12″ from the tail
18 mm12″ from the nose
88 mmnose rocker, at the tip
372 mmflat to within 3 mm, from 39 % to 64 % of the length
48 %of the length to the lowest point, from the tail
145 mmat its thickest, 52 % from the tail
40 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 80 L · measured

36 mmtail rocker, at the tip
18 mm12″ from the tail
22 mm12″ from the nose
96 mmnose rocker, at the tip
385 mmflat to within 3 mm, from 40 % to 63 % of the length
48 %of the length to the lowest point, from the tail
153 mmat its thickest, 52 % from the tail · on the photo; JP Australia lists 118 mm
43 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 95 L · scaled from the 80 L measured

41 mmtail rocker, at the tip
22 mm12″ from the tail
28 mm12″ from the nose
107 mmnose rocker, at the tip
403 mmflat to within 3 mm, from 40 % to 62 % of the length
48 %of the length to the lowest point, from the tail
158 mmat its thickest, 52 % from the tail
48 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 80 L. Tail end set by Claude, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived