JP Australia, 2025

Surf 2025

2460mm long · 8'1"

710mm wide

106mm thick

103litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

The 2024 outline, refined. The 103 L is the same length and width as the 2024 103 L.

103 L against the 2024 103 L, listed length and width.

As listed by JP Australia

JP Australia Surf 2025: every size as listed by JP Australia
size	length	width	thickness	weight
82 L	219 cm · 2190 mm	640 mm	106 mm	5.3 kg
92 L	229 cm · 2290 mm	690 mm	102 mm	5.7 kg
103 L	246 cm · 2460 mm	710 mm	106 mm	6.2 kg
113 L	259 cm · 2590 mm	740 mm	106 mm	6.5 kg
128 L	270 cm · 2700 mm	770 mm	109 mm	7 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the JP Australia Surf 103 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2024

The 2025 103 L is the same length and width as the 2024 103 L. Open the 2024

listed length and width

2025 103 L 2024 103 L

After it · 2026

The 2026 103 L is the same length and width as the 2025 103 L. Open the 2026

listed length and width

2025 103 L 2026 103 L

The JP Australia Surf over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 82 L outline · derived

52 %wide point, 1138 mm from the tail

3.42length over width

408mm wide 12″ from the tail

10,577cm² of planform

Read off the 92 L outline · derived

52 %wide point, 1190 mm from the tail

3.32length over width

429mm wide 12″ from the tail

11,924cm² of planform

Read off the 103 L outline · derived

52 %wide point, 1278 mm from the tail

3.50length over width

422mm wide 12″ from the tail

13,048cm² of planform

Read off the 113 L outline · derived

52 %wide point, 1346 mm from the tail

3.50length over width

433mm wide 12″ from the tail

14,463cm² of planform

Read off the 128 L outline · derived

52 %wide point, 1403 mm from the tail

3.51length over width

441mm wide 12″ from the tail

15,688cm² of planform

Rocker of the 82 L · scaled from the 103 L measured

77 mmtail rocker, at the tip

37 mm12″ from the tail

64 mm12″ from the nose

159 mmnose rocker, at the tip

411 mmflat to within 3 mm, from 38 % to 57 % of the length

53 %of the length to the lowest point, from the tail

128 mmat its thickest, 51 % from the tail

29 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 92 L · scaled from the 103 L measured

81 mmtail rocker, at the tip

40 mm12″ from the tail

69 mm12″ from the nose

167 mmnose rocker, at the tip

422 mmflat to within 3 mm, from 38 % to 57 % of the length

53 %of the length to the lowest point, from the tail

123 mmat its thickest, 51 % from the tail

30 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 103 L · measured

87 mmtail rocker, at the tip

45 mm12″ from the tail

79 mm12″ from the nose

180 mmnose rocker, at the tip

443 mmflat to within 3 mm, from 38 % to 56 % of the length

53 %of the length to the lowest point, from the tail

128 mmat its thickest, 51 % from the tail · on the photo; JP Australia lists 106 mm

33 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 113 L · scaled from the 103 L measured

92 mmtail rocker, at the tip

48 mm12″ from the tail

86 mm12″ from the nose

189 mmnose rocker, at the tip

458 mmflat to within 3 mm, from 39 % to 56 % of the length

53 %of the length to the lowest point, from the tail

128 mmat its thickest, 51 % from the tail

34 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 128 L · scaled from the 103 L measured

96 mmtail rocker, at the tip

52 mm12″ from the tail

92 mm12″ from the nose

198 mmnose rocker, at the tip

472 mmflat to within 3 mm, from 39 % to 56 % of the length

53 %of the length to the lowest point, from the tail

132 mmat its thickest, 51 % from the tail

36 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 103 L. Tail end set by rule.