Stand-up paddle

JP Australia, 2026

Surf Plus 2026

2593mm long · 8'6"

800mm wide

117mm thick

135litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

The 2025 outline, refined. The 135 L is the same length and width as the 2025 135 L.

135 L against the 2025 135 L, listed length and width.

As listed by JP Australia

JP Australia Surf Plus 2026: every size as listed by JP Australia
sizelengthwidththicknessweight
125 L251,5 cm · 2515 mm775 mm112 mm7.2 kg
135 L259,3 cm · 2593 mm800 mm117 mm7.7 kg

Every size side by side, tails on one line, one scale

259325150 mm2515125 L775 w2593135 L792 w

Next to your board?

Lay the JP Australia Surf Plus 135 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2025

The 2026 135 L is the same length and width as the 2025 135 L. Open the 2025

listed length and width

2026 135 L over the 2025 135 L, tails aligned, one scale
2026 135 L 2025 135 L

The JP Australia Surf Plus over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia Surf Plus 2026 from above and from the side, every size at true scale, tails aligned
JP Australia Surf Plus 2026 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 125 L outline · derived

54 %wide point, 1346 mm from the tail

3.25length over width

486mm wide 12″ from the tail

15,235cm² of planform

Read off the 135 L outline · derived

54 %wide point, 1388 mm from the tail

3.27length over width

488mm wide 12″ from the tail

16,059cm² of planform

Rocker of the 125 L · scaled from the 135 L measured

80 mmtail rocker, at the tip
41 mm12″ from the tail
57 mm12″ from the nose
144 mmnose rocker, at the tip
554 mmflat to within 3 mm, from 37 % to 59 % of the length
41 %of the length to the lowest point, from the tail
130 mmat its thickest, 48 % from the tail
27 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 135 L · measured

82 mmtail rocker, at the tip
43 mm12″ from the tail
61 mm12″ from the nose
149 mmnose rocker, at the tip
563 mmflat to within 3 mm, from 37 % to 59 % of the length
41 %of the length to the lowest point, from the tail
136 mmat its thickest, 48 % from the tail · on the photo; JP Australia lists 117 mm
28 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 135 L. Tail end set by rule.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived