JP Australia, 2023

WindsupAir LE 2023

3350mm long · 11'0"

870mm wide

152mm thick

353litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Shorter and fuller than most. A round tail, a pointed nose and gently curved rails.

derived · against the 303 other sup boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia WindsupAir LE 2023: every size as listed by JP Australia
size	length	width	thickness	weight
318 L	319 cm · 3190 mm	810 mm	152 mm	8.7 kg
353 L	335 cm · 3350 mm	870 mm	152 mm	9.2 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the JP Australia WindsupAir LE 353 L over up to four others, at one scale.

Compare with…

Generations

After it · 2024

The 2024 353 L is the same length and width as the 2023 353 L. Open the 2024

listed length and width

2023 353 L 2024 353 L

The JP Australia WindsupAir LE over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 318 L outline · derived

52 %wide point, 1645 mm from the tail

3.94length over width

536mm wide 12″ from the tail

20,617cm² of planform

Read off the 353 L outline · derived

52 %wide point, 1728 mm from the tail

3.81length over width

573mm wide 12″ from the tail

23,487cm² of planform

Rocker of the 318 L · scaled from the 353 L, borrowed (≈), estimated

≈ 41 mmtail rocker, at the tip

≈ 9 mm12″ from the tail

≈ 28 mm12″ from the nose

≈ 101 mmnose rocker, at the tip

≈ 1536 mmflat to within 3 mm, from 25 % to 73 % of the length

48 %of the length to the lowest point, from the tail

≈ 152 mmat its thickest, 44 % from the tail

≈ 48 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 353 L · borrowed (≈), estimated

≈ 44 mmtail rocker, at the tip

≈ 10 mm12″ from the tail

≈ 31 mm12″ from the nose

≈ 107 mmnose rocker, at the tip

≈ 1588 mmflat to within 3 mm, from 25 % to 72 % of the length

48 %of the length to the lowest point, from the tail

≈ 152 mmat its thickest, 44 % from the tail

≈ 50 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · shaded: the middle 80 % of its group · No usable side photo of this board: the median of 55 inflatable SUP boards from 45 product lines. Tail ends set by rule, Claude or a brand convention on their photos, none checked by a person. · estimated