JP Australia, 2023

WindsupAir LE 3DS 2023

3810mm long · 12'6"

790mm wide

152mm thick

333litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

A finer nose than most. A round tail, a pointed nose and gently curved rails.

derived · against the 303 other sup boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia WindsupAir LE 3DS 2023: every size as listed by JP Australia
size	length	width	thickness	weight
333 L	381 cm · 3810 mm	790 mm	152 mm	10 kg
353 L	335 cm · 3350 mm	870 mm	152 mm	9.4 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the JP Australia WindsupAir LE 3DS 333 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 333 L outline · derived

46 %wide point, 1755 mm from the tail

4.74length over width

493mm wide 12″ from the tail

23,902cm² of planform

Read off the 353 L outline · derived

46 %wide point, 1544 mm from the tail

3.85length over width

552mm wide 12″ from the tail

22,747cm² of planform

Rocker of the 333 L · estimated

≈ 67 mmtail rocker, at the tip

≈ 11 mm12″ from the tail

≈ 13 mm12″ from the nose

≈ 101 mmnose rocker, at the tip

≈ 677 mmflat to within 3 mm, from 68 % to 86 % of the length

81 %of the length to the lowest point, from the tail

≈ 211 mmat its thickest, 47 % from the tail · on the photo; JP Australia lists ≈ 152 mm

≈ 65 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 353 L · scaled from the 333 L, estimated

≈ 57 mmtail rocker, at the tip

≈ 9 mm12″ from the tail

≈ 10 mm12″ from the nose

≈ 87 mmnose rocker, at the tip

≈ 648 mmflat to within 3 mm, from 67 % to 87 % of the length

81 %of the length to the lowest point, from the tail

≈ 211 mmat its thickest, 47 % from the tail

≈ 57 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · On JP Australia's photo of the 333 L, whose bottom line has a 11–12 mm step at 47 % of the length: a foil plate traced as hull, so it lends to no other board. Tail end set by rule. · estimated