Stand-up paddle

Starboard, 2026

GO Surf Paddleboard 2026

2896mm long · 9'6"

790mm wide

102mm thick

155litres

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

A narrower tail than most. A rounded pin tail, a full nose and gently curved rails.

derived · against the 157 other sup boards in the atlas, read off the outlines.

As listed by Starboard

Starboard GO Surf Paddleboard 2026: every size as listed by Starboard
sizelengthwidththicknessweight
155 L289.6 cm · 2896 mm790 mm102 mm10.7 kg
174 L320 cm · 3200 mm787 mm107 mm11.6 kg

Every size side by side, tails on one line, one scale

320028960 mm2896155 L778 w3200174 L787 w

Next to your board?

Lay the Starboard GO Surf Paddleboard 155 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Starboard GO Surf Paddleboard 2026 from above and from the side, every size at true scale, tails aligned
Starboard GO Surf Paddleboard 2026 from the side, true proportions: the bottom's rocker over a flat table, every size; borrowed (≈), drawn hollow

Read off the 155 L outline · derived

54 %wide point, 1562 mm from the tail

3.72length over width

442mm wide 12″ from the tail

17,905cm² of planform

Read off the 174 L outline · derived

54 %wide point, 1726 mm from the tail

4.07length over width

426mm wide 12″ from the tail

20,005cm² of planform

Rocker of the 155 L · borrowed (≈), estimated

≈ 88 mmtail rocker, at the tip
≈ 47 mm12″ from the tail
≈ 68 mm12″ from the nose
≈ 137 mmnose rocker, at the tip
≈ 625 mmflat to within 3 mm, from 38 % to 60 % of the length
48 %of the length to the lowest point, from the tail
≈ 102 mmat its thickest, 50 % from the tail
≈ 21 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 174 L · scaled from the 155 L, borrowed (≈), estimated

≈ 97 mmtail rocker, at the tip
≈ 55 mm12″ from the tail
≈ 80 mm12″ from the nose
≈ 153 mmnose rocker, at the tip
≈ 661 mmflat to within 3 mm, from 39 % to 59 % of the length
48 %of the length to the lowest point, from the tail
≈ 107 mmat its thickest, 50 % from the tail
≈ 23 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · shaded: the middle 80 % of its group · No usable side photo of this board: the median of 26 hard SUP boards from 21 product lines. Tail ends set by rule, Claude or a brand convention on their photos, none checked by a person. · estimated

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived