Wing foil

Starboard, 2026

Take Off Foilboard 2026

1651mm long · 5'5"

584mm wide

155mm thick

80litres

Open in Studio See it on star-board.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Shorter than the 2025. The 80 L is 54 mm shorter than the 2025 80 L, same width.

80 L against the 2025 80 L, listed length and width.

As listed by Starboard

Starboard Take Off Foilboard 2026: every size as listed by Starboard
sizelengthwidththicknessweight
30 L129.5 cm · 1295 mm474 mm97 mm · medium confidence3.4 kg
45 L139.7 cm · 1397 mm508 mm122 mm4.1 kg
55 L145.7 cm · 1457 mm536 mm132 mm4.5 kg
70 L157.5 cm · 1575 mm572 mm142 mm5 kg
80 L165.1 cm · 1651 mm584 mm155 mm5.5 kg
95 L182.9 cm · 1829 mm610 mm140 mm · medium confidence6.1–6.9 kg
105 L198.1 cm · 1981 mm635 mm147 mm · medium confidence6.5–7.4 kg
115 L213.4 cm · 2134 mm660 mm147 mm7–8 kg

Every size side by side, tails on one line, one scale

213412950 mm129530 L474 w139745 L508 w145755 L536 w157570 L572 w165180 L586 w182995 L610 w1981105 L638 w2134115 L660 w

Next to your board?

Lay the Starboard Take Off Foilboard 80 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2025

The 2026 80 L is 54 mm shorter than the 2025 80 L, same width; its wide point moved 31 mm toward the nose. Open the 2025

listed length and width · wide point derived

2026 80 L over the 2025 80 L, tails aligned, one scale
2026 80 L 2025 80 L

The Starboard Take Off Foilboard over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Starboard Take Off Foilboard 2026 from above and from the side, every size at true scale, tails aligned
Starboard Take Off Foilboard 2026 from the side, true proportions: the bottom's rocker over a flat table, every size; borrowed (≈), drawn hollow

Read off the 30 L outline · derived

56 %wide point, 719 mm from the tail

2.73length over width

405mm wide 12″ from the tail

5,001cm² of planform

Read off the 45 L outline · derived

56 %wide point, 775 mm from the tail

2.75length over width

426mm wide 12″ from the tail

5,782cm² of planform

Read off the 55 L outline · derived

56 %wide point, 808 mm from the tail

2.72length over width

444mm wide 12″ from the tail

6,362cm² of planform

Read off the 70 L outline · derived

56 %wide point, 874 mm from the tail

2.75length over width

464mm wide 12″ from the tail

7,340cm² of planform

Read off the 80 L outline · derived

56 %wide point, 916 mm from the tail

2.82length over width

469mm wide 12″ from the tail

7,881cm² of planform

Read off the 95 L outline · derived

56 %wide point, 1015 mm from the tail

3.00length over width

474mm wide 12″ from the tail

9,089cm² of planform

Read off the 105 L outline · derived

50 %wide point, 991 mm from the tail

3.11length over width

491mm wide 12″ from the tail

10,340cm² of planform

Read off the 115 L outline · derived

56 %wide point, 1184 mm from the tail

3.23length over width

491mm wide 12″ from the tail

11,474cm² of planform

Rocker of the 30 L · scaled from the 80 L, borrowed (≈), estimated

≈ 31 mmtail rocker, at the tip
≈ 5 mm12″ from the tail
≈ 14 mm12″ from the nose
≈ 90 mmnose rocker, at the tip
≈ 425 mmflat to within 3 mm, from 31 % to 63 % of the length
50 %of the length to the lowest point, from the tail
≈ 97 mmat its thickest, 53 % from the tail
≈ 30 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 45 L · scaled from the 80 L, borrowed (≈), estimated

≈ 34 mmtail rocker, at the tip
≈ 6 mm12″ from the tail
≈ 18 mm12″ from the nose
≈ 98 mmnose rocker, at the tip
≈ 434 mmflat to within 3 mm, from 32 % to 63 % of the length
50 %of the length to the lowest point, from the tail
≈ 122 mmat its thickest, 53 % from the tail
≈ 32 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 55 L · scaled from the 80 L, borrowed (≈), estimated

≈ 36 mmtail rocker, at the tip
≈ 6 mm12″ from the tail
≈ 20 mm12″ from the nose
≈ 102 mmnose rocker, at the tip
≈ 441 mmflat to within 3 mm, from 32 % to 63 % of the length
50 %of the length to the lowest point, from the tail
≈ 132 mmat its thickest, 53 % from the tail
≈ 34 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 70 L · scaled from the 80 L, borrowed (≈), estimated

≈ 40 mmtail rocker, at the tip
≈ 7 mm12″ from the tail
≈ 25 mm12″ from the nose
≈ 111 mmnose rocker, at the tip
≈ 455 mmflat to within 3 mm, from 33 % to 62 % of the length
50 %of the length to the lowest point, from the tail
≈ 142 mmat its thickest, 53 % from the tail
≈ 36 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 80 L · borrowed (≈), estimated

≈ 42 mmtail rocker, at the tip
≈ 8 mm12″ from the tail
≈ 28 mm12″ from the nose
≈ 117 mmnose rocker, at the tip
≈ 463 mmflat to within 3 mm, from 34 % to 62 % of the length
50 %of the length to the lowest point, from the tail
≈ 155 mmat its thickest, 53 % from the tail
≈ 38 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 95 L · scaled from the 80 L, borrowed (≈), estimated

≈ 48 mmtail rocker, at the tip
≈ 10 mm12″ from the tail
≈ 37 mm12″ from the nose
≈ 131 mmnose rocker, at the tip
≈ 483 mmflat to within 3 mm, from 35 % to 61 % of the length
50 %of the length to the lowest point, from the tail
≈ 140 mmat its thickest, 53 % from the tail
≈ 42 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 105 L · scaled from the 80 L, borrowed (≈), estimated

≈ 53 mmtail rocker, at the tip
≈ 12 mm12″ from the tail
≈ 44 mm12″ from the nose
≈ 142 mmnose rocker, at the tip
≈ 500 mmflat to within 3 mm, from 36 % to 61 % of the length
50 %of the length to the lowest point, from the tail
≈ 147 mmat its thickest, 53 % from the tail
≈ 46 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 115 L · scaled from the 80 L, borrowed (≈), estimated

≈ 58 mmtail rocker, at the tip
≈ 14 mm12″ from the tail
≈ 52 mm12″ from the nose
≈ 154 mmnose rocker, at the tip
≈ 516 mmflat to within 3 mm, from 36 % to 61 % of the length
50 %of the length to the lowest point, from the tail
≈ 147 mmat its thickest, 53 % from the tail
≈ 49 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · shaded: the middle 80 % of its group · No usable side photo of this board: the median of 90 hard wing boards from 58 product lines. Tail ends set by rule, Claude or a brand convention on their photos, none checked by a person. · estimated

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived