Stand-up paddle

JP Australia, 2025

AllroundAir LE 3DS 2025

3190mm long · 10'6"

810mm wide

127mm thick

256litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

The 2024 outline, refined. The 256 L is the same length and width as the 2024 256 L.

256 L against the 2024 256 L, listed length and width.

As listed by JP Australia

JP Australia AllroundAir LE 3DS 2025: every size as listed by JP Australia
sizelengthwidththicknessweight
256 L319 cm · 3190 mm810 mm127 mm8.2 kg
318 L319 cm · 3190 mm810 mm152 mm8.4 kg
339 L335 cm · 3350 mm840 mm152 mm8.8 kg

Every size side by side, tails on one line, one scale

335031900 mm3190256 L810 w3190318 L810 w3350339 L840 w

Next to your board?

Lay the JP Australia AllroundAir LE 3DS 256 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2024

The 2025 256 L is the same length and width as the 2024 256 L. Open the 2024

listed length and width

2025 256 L over the 2024 256 L, tails aligned, one scale
2025 256 L 2024 256 L

The JP Australia AllroundAir LE 3DS over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia AllroundAir LE 3DS 2025 from above and from the side, every size at true scale, tails aligned
JP Australia AllroundAir LE 3DS 2025 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 256 L outline · derived

50 %wide point, 1581 mm from the tail

3.94length over width

548mm wide 12″ from the tail

20,496cm² of planform

Read off the 318 L outline · derived

50 %wide point, 1581 mm from the tail

3.94length over width

548mm wide 12″ from the tail

20,496cm² of planform

Read off the 339 L outline · derived

50 %wide point, 1660 mm from the tail

3.99length over width

561mm wide 12″ from the tail

22,321cm² of planform

Rocker of the 256 L · estimated

≈ 73 mmtail rocker, at the tip
≈ 4 mm12″ from the tail
≈ 23 mm12″ from the nose
≈ 109 mmnose rocker, at the tip
≈ 162 mmflat to within 3 mm, from 10 % to 15 % of the length
15 %of the length to the lowest point, from the tail
≈ 192 mmat its thickest, 13 % from the tail · on the photo; JP Australia lists ≈ 127 mm
≈ 70 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 318 L · scaled from the 256 L, estimated

≈ 73 mmtail rocker, at the tip
≈ 4 mm12″ from the tail
≈ 23 mm12″ from the nose
≈ 109 mmnose rocker, at the tip
≈ 162 mmflat to within 3 mm, from 10 % to 15 % of the length
15 %of the length to the lowest point, from the tail
≈ 229 mmat its thickest, 13 % from the tail
≈ 70 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 339 L · scaled from the 256 L, estimated

≈ 77 mmtail rocker, at the tip
≈ 13 mm12″ from the tail
≈ 25 mm12″ from the nose
≈ 115 mmnose rocker, at the tip
≈ 168 mmflat to within 3 mm, from 10 % to 15 % of the length
15 %of the length to the lowest point, from the tail
≈ 229 mmat its thickest, 13 % from the tail
≈ 73 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · On JP Australia's photo of the 256 L, whose bottom line has a 18 mm step at 15 % of the length: a foil plate traced as hull, so it lends to no other board. Tail end set by Claude, not checked by a person. · estimated

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived