Stand-up paddle

JP Australia, 2020

Allwater GT 2020

4260mm long · 14'0"

700mm wide

250mm thick

343litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Longer and leaner than most. A square tail, a pointed nose and curvy rails.

derived · against the 303 other sup boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia Allwater GT 2020: every size as listed by JP Australia
sizelengthwidththicknessweight
322 L381 cm · 3810 mm720 mm250 mm14.3 kg
343 L426 cm · 4260 mm700 mm250 mm14.8 kg

Every size side by side, tails on one line, one scale

426038100 mm3810322 L720 w4260343 L698 w

Next to your board?

Lay the JP Australia Allwater GT 343 L over up to four others, at one scale.

Compare with…

Generations

After it · 2021

The 2021 343 L is the same length and width as the 2020 343 L; its wide point moved 87 mm toward the tail. Open the 2021

listed length and width · wide point derived

2020 343 L over the 2021 343 L, tails aligned, one scale
2020 343 L 2021 343 L

The JP Australia Allwater GT over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia Allwater GT 2020 from above and from the side, every size at true scale, tails aligned
JP Australia Allwater GT 2020 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 322 L outline · derived

47 %wide point, 1804 mm from the tail

5.29length over width

442mm wide 12″ from the tail

21,029cm² of planform

Read off the 343 L outline · derived

47 %wide point, 2018 mm from the tail

6.10length over width

417mm wide 12″ from the tail

22,807cm² of planform

Rocker of the 322 L · scaled from the 343 L measured

47 mmtail rocker, at the tip
30 mm12″ from the tail
25 mm12″ from the nose
76 mmnose rocker, at the tip
913 mmflat to within 3 mm, from 40 % to 64 % of the length
50 %of the length to the lowest point, from the tail
231 mmat its thickest, 62 % from the tail
29 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 343 L · measured

53 mmtail rocker, at the tip
36 mm12″ from the tail
30 mm12″ from the nose
86 mmnose rocker, at the tip
949 mmflat to within 3 mm, from 40 % to 63 % of the length
50 %of the length to the lowest point, from the tail
231 mmat its thickest, 62 % from the tail · on the photo; JP Australia lists 250 mm
33 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 343 L. Tail end set by Claude, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived