Stand-up paddle

JP Australia, 2021

Allwater GT 2021

4260mm long · 14'0"

700mm wide

250mm thick

343litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

The 2020 outline, refined. The 343 L is the same length and width as the 2020 343 L.

343 L against the 2020 343 L, listed length and width.

As listed by JP Australia

JP Australia Allwater GT 2021: every size as listed by JP Australia
sizelengthwidththicknessweight
322 L381 cm · 3810 mm724 mm250 mm14.6 kg
343 L426 cm · 4260 mm700 mm250 mm15.3 kg

Every size side by side, tails on one line, one scale

426038100 mm3810322 L724 w4260343 L705 w

Next to your board?

Lay the JP Australia Allwater GT 343 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2020

The 2021 343 L is the same length and width as the 2020 343 L; its wide point moved 87 mm toward the tail. Open the 2020

listed length and width · wide point derived

2021 343 L over the 2020 343 L, tails aligned, one scale
2021 343 L 2020 343 L

After it · 2022

The 2022 343 L is the same length and width as the 2021 343 L; its wide point moved 83 mm toward the tail. Open the 2022

listed length and width · wide point derived

2021 343 L over the 2022 343 L, tails aligned, one scale
2021 343 L 2022 343 L

The JP Australia Allwater GT over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia Allwater GT 2021 from above and from the side, every size at true scale, tails aligned
JP Australia Allwater GT 2021 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 322 L outline · derived

45 %wide point, 1727 mm from the tail

5.26length over width

493mm wide 12″ from the tail

21,583cm² of planform

Read off the 343 L outline · derived

45 %wide point, 1931 mm from the tail

6.04length over width

470mm wide 12″ from the tail

23,512cm² of planform

Rocker of the 322 L · scaled from the 343 L measured

49 mmtail rocker, at the tip
33 mm12″ from the tail
19 mm12″ from the nose
65 mmnose rocker, at the tip
1542 mmflat to within 3 mm, from 38 % to 78 % of the length
50 %of the length to the lowest point, from the tail
231 mmat its thickest, 62 % from the tail
20 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 343 L · measured

54 mmtail rocker, at the tip
38 mm12″ from the tail
23 mm12″ from the nose
74 mmnose rocker, at the tip
1458 mmflat to within 3 mm, from 40 % to 74 % of the length
50 %of the length to the lowest point, from the tail
231 mmat its thickest, 62 % from the tail · on the photo; JP Australia lists 250 mm
22 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 343 L. Tail end set by Claude, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived