Stand-up paddle

JP Australia, 2026

Allwater GT Biax 2026

4260mm long · 14'0"

700mm wide

250mm thick

343litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

The 2025 outline, refined. The 343 L is the same length and width as the 2025 343 L.

343 L against the 2025 343 L, listed length and width.

As listed by JP Australia

JP Australia Allwater GT Biax 2026: every size as listed by JP Australia
sizelengthwidththicknessweight
322 L381 cm · 3810 mm724 mm250 mm14.6 kg
343 L426 cm · 4260 mm700 mm250 mm16.3 kg

Every size side by side, tails on one line, one scale

426038100 mm3810322 L724 w4260343 L705 w

Next to your board?

Lay the JP Australia Allwater GT Biax 343 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2025

The 2026 343 L is the same length and width as the 2025 343 L. Open the 2025

listed length and width

2026 343 L over the 2025 343 L, tails aligned, one scale
2026 343 L 2025 343 L

The JP Australia Allwater GT Biax over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia Allwater GT Biax 2026 from above and from the side, every size at true scale, tails aligned
JP Australia Allwater GT Biax 2026 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 322 L outline · derived

48 %wide point, 1838 mm from the tail

5.26length over width

506mm wide 12″ from the tail

21,579cm² of planform

Read off the 343 L outline · derived

48 %wide point, 2055 mm from the tail

6.04length over width

483mm wide 12″ from the tail

23,491cm² of planform

Rocker of the 322 L · scaled from the 343 L measured

48 mmtail rocker, at the tip
33 mm12″ from the tail
41 mm12″ from the nose
119 mmnose rocker, at the tip
875 mmflat to within 3 mm, from 37 % to 60 % of the length
45 %of the length to the lowest point, from the tail
251 mmat its thickest, 61 % from the tail
45 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 343 L · measured

54 mmtail rocker, at the tip
38 mm12″ from the tail
50 mm12″ from the nose
134 mmnose rocker, at the tip
465 mmflat to within 3 mm, from 37 % to 48 % of the length
45 %of the length to the lowest point, from the tail
251 mmat its thickest, 61 % from the tail
50 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 343 L. Tail end set by rule.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived