Stand-up paddle

JP Australia, 2020

Downwind Race 2020

4260mm long · 14'0"

626mm wide

271mm thick

282litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

A narrower tail than most. A pin tail, a pointed nose and curvy rails.

derived · against the 303 other sup boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia Downwind Race 2020: every size as listed by JP Australia
sizelengthwidththicknessweight
282 L426 cm · 4260 mm626 mm271 mm11.9 kg

Next to your board?

Lay the JP Australia Downwind Race 282 L over up to four others, at one scale.

Compare with…

Generations

After it · 2021

The 2021 282 L is the same length and width as the 2020 282 L; its wide point moved 77 mm toward the nose. Open the 2021

listed length and width · wide point derived

2020 282 L over the 2021 282 L, tails aligned, one scale
2020 282 L 2021 282 L

The JP Australia Downwind Race over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia Downwind Race 2020 from above and from the side, every size at true scale, tails aligned
JP Australia Downwind Race 2020 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 282 L outline · derived

51 %wide point, 2177 mm from the tail

6.74length over width

279mm wide 12″ from the tail

20,370cm² of planform

Rocker of the 282 L · measured

76 mmtail rocker, at the tip
53 mm12″ from the tail
68 mm12″ from the nose
200 mmnose rocker, at the tip
555 mmflat to within 3 mm, from 44 % to 57 % of the length
52 %of the length to the lowest point, from the tail
278 mmat its thickest, 70 % from the tail · on the photo; JP Australia lists 271 mm
72 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 282 L. Tail end set by Claude, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived