Stand-up paddle

JP Australia, 2021

Downwind Race 2021

4260mm long · 14'0"

626mm wide

271mm thick

282litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

The 2020 outline, refined. The 282 L is the same length and width as the 2020 282 L.

282 L against the 2020 282 L, listed length and width.

As listed by JP Australia

JP Australia Downwind Race 2021: every size as listed by JP Australia
sizelengthwidththicknessweight
282 L426 cm · 4260 mm626 mm271 mm13.3 kg

Next to your board?

Lay the JP Australia Downwind Race 282 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2020

The 2021 282 L is the same length and width as the 2020 282 L; its wide point moved 77 mm toward the nose. Open the 2020

listed length and width · wide point derived

2021 282 L over the 2020 282 L, tails aligned, one scale
2021 282 L 2020 282 L

The JP Australia Downwind Race over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia Downwind Race 2021 from above and from the side, every size at true scale, tails aligned
JP Australia Downwind Race 2021 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 282 L outline · derived

53 %wide point, 2254 mm from the tail

6.75length over width

281mm wide 12″ from the tail

20,330cm² of planform

Rocker of the 282 L · measured

80 mmtail rocker, at the tip
57 mm12″ from the tail
63 mm12″ from the nose
186 mmnose rocker, at the tip
1197 mmflat to within 3 mm, from 41 % to 69 % of the length
50 %of the length to the lowest point, from the tail
275 mmat its thickest, 70 % from the tail · on the photo; JP Australia lists 271 mm
57 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 282 L. Tail end set by Claude, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived