Wing foil

JP Australia, 2026

S-Winger Pro 2026

1350mm long · 4'5"

530mm wide

78mm thick

44litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

The 2025 outline, refined. The 44 L is the same length and width as the 2025 44 L.

44 L against the 2025 44 L, listed length and width.

As listed by JP Australia

JP Australia S-Winger Pro 2026: every size as listed by JP Australia
sizelengthwidththicknessweight
33 L132 cm · 1320 mm510 mm71 mm4.3 kg
44 L135 cm · 1350 mm530 mm78 mm · estimated4.8 kg

Every size side by side, tails on one line, one scale

135013200 mm132033 L510 w135044 L531 w

Next to your board?

Lay the JP Australia S-Winger Pro 44 L over up to four others, at one scale.

Compare with…

Generations

Before it · 2025

The 2026 44 L is the same length and width as the 2025 44 L. Open the 2025

listed length and width

2026 44 L over the 2025 44 L, tails aligned, one scale
2026 44 L 2025 44 L

The JP Australia S-Winger Pro over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia S-Winger Pro 2026 from above and from the side, every size at true scale, tails aligned
JP Australia S-Winger Pro 2026 from the side, true proportions: the bottom's rocker over a flat table, every size

Read off the 33 L outline · derived

52 %wide point, 685 mm from the tail

2.59length over width

441mm wide 12″ from the tail

5,435cm² of planform

Read off the 44 L outline · derived

52 %wide point, 700 mm from the tail

2.54length over width

457mm wide 12″ from the tail

5,790cm² of planform

Rocker of the 33 L · scaled from the 44 L measured

47 mmtail rocker, at the tip
4 mm12″ from the tail
18 mm12″ from the nose
90 mmnose rocker, at the tip
425 mmflat to within 3 mm, from 28 % to 60 % of the length
42 %of the length to the lowest point, from the tail
111 mmat its thickest, 48 % from the tail
46 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 44 L · measured

48 mmtail rocker, at the tip
5 mm12″ from the tail
19 mm12″ from the nose
92 mmnose rocker, at the tip
431 mmflat to within 3 mm, from 28 % to 60 % of the length
42 %of the length to the lowest point, from the tail
122 mmat its thickest, 48 % from the tail · on the photo; JP Australia lists 78 mm
47 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 44 L. Tail end set by Claude, not checked by a person.

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived