JP Australia, 2023

SportstAir SE 3DS 2023

3810mm long · 12'6"

760mm wide

152mm thick

336litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

A finer nose than most. A round tail, a pointed nose and curvy rails.

derived · against the 303 other sup boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia SportstAir SE 3DS 2023: every size as listed by JP Australia
size	length	width	thickness	weight
311 L	381 cm · 3810 mm	710 mm	152 mm	10 kg
336 L	381 cm · 3810 mm	760 mm	152 mm	11 kg
377 L	426 cm · 4260 mm	760 mm	152 mm	12.2 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the JP Australia SportstAir SE 3DS 336 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 311 L outline · derived

47 %wide point, 1789 mm from the tail

5.37length over width

416mm wide 12″ from the tail

20,487cm² of planform

Read off the 336 L outline · derived

47 %wide point, 1789 mm from the tail

4.87length over width

459mm wide 12″ from the tail

22,593cm² of planform

Read off the 377 L outline · derived

47 %wide point, 2000 mm from the tail

5.61length over width

433mm wide 12″ from the tail

24,519cm² of planform

Rocker of the 311 L · scaled from the 336 L, estimated

≈ 62 mmtail rocker, at the tip

≈ 10 mm12″ from the tail

≈ 48 mm12″ from the nose

≈ 162 mmnose rocker, at the tip

≈ 116 mmflat to within 3 mm, from 10 % to 13 % of the length

12 %of the length to the lowest point, from the tail

≈ 214 mmat its thickest, 12 % from the tail

≈ 79 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 336 L · estimated

≈ 62 mmtail rocker, at the tip

≈ 10 mm12″ from the tail

≈ 48 mm12″ from the nose

≈ 162 mmnose rocker, at the tip

≈ 116 mmflat to within 3 mm, from 10 % to 13 % of the length

12 %of the length to the lowest point, from the tail

≈ 214 mmat its thickest, 12 % from the tail · on the photo; JP Australia lists ≈ 152 mm

≈ 79 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 377 L · scaled from the 336 L, estimated

≈ 71 mmtail rocker, at the tip

≈ 19 mm12″ from the tail

≈ 60 mm12″ from the nose

≈ 182 mmnose rocker, at the tip

≈ 122 mmflat to within 3 mm, from 10 % to 13 % of the length

12 %of the length to the lowest point, from the tail

≈ 214 mmat its thickest, 12 % from the tail

≈ 88 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · On JP Australia's photo of the 336 L, whose bottom line has a 16 mm step at 12 % of the length: a foil plate traced as hull, so it lends to no other board. Tail end set by Claude, not checked by a person. · estimated