Wing foil

JP Australia, 2021

Wing Air 2021

1830mm long · 6'0"

720mm wide

130mm thick

130litres

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

A fuller nose than most. A round tail, a full nose and parallel rails.

derived · against the 225 other wing foil boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia Wing Air 2021: every size as listed by JP Australia
sizelengthwidththicknessweight
110 L165 cm · 1650 mm700 mm130 mm8.8 kg
130 L183 cm · 1830 mm720 mm130 mm9.6 kg

Every size side by side, tails on one line, one scale

183016500 mm1650110 L700 w1830130 L731 w

Next to your board?

Lay the JP Australia Wing Air 130 L over up to four others, at one scale.

Compare with…

Generations

After it · 2022

The 2022 100 L is 130 mm shorter and 30 mm narrower than the 2021 110 L; its wide point moved 39 mm toward the tail. Open the 2022

listed length and width · wide point derived

2021 110 L over the 2022 100 L, tails aligned, one scale
2021 110 L 2022 100 L

The JP Australia Wing Air over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia Wing Air 2021 from above and from the side, every size at true scale, tails aligned
JP Australia Wing Air 2021 from the side, true proportions: the bottom's rocker over a flat table, every size; borrowed (≈), drawn hollow

Read off the 110 L outline · derived

55 %wide point, 912 mm from the tail

2.36length over width

583mm wide 12″ from the tail

9,841cm² of planform

Read off the 130 L outline · derived

55 %wide point, 1011 mm from the tail

2.50length over width

596mm wide 12″ from the tail

11,393cm² of planform

Rocker of the 110 L · scaled from the 130 L, borrowed (≈), estimated

≈ 45 mmtail rocker, at the tip
≈ 5 mm12″ from the tail
≈ 20 mm12″ from the nose
≈ 80 mmnose rocker, at the tip
≈ 567 mmflat to within 3 mm, from 23 % to 58 % of the length
52 %of the length to the lowest point, from the tail
≈ 130 mmat its thickest, 29 % from the tail
≈ 71 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 130 L · borrowed (≈), estimated

≈ 52 mmtail rocker, at the tip
≈ 7 mm12″ from the tail
≈ 26 mm12″ from the nose
≈ 91 mmnose rocker, at the tip
≈ 607 mmflat to within 3 mm, from 24 % to 57 % of the length
52 %of the length to the lowest point, from the tail
≈ 130 mmat its thickest, 29 % from the tail
≈ 78 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · shaded: the middle 80 % of its group · No usable side photo of this board: the median of 18 inflatable wing boards from 15 product lines. Tail ends set by rule, Claude or a brand convention on their photos, none checked by a person. · estimated

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived