JP Australia, 2023

X-Foil PRO 2023

1730mm long · 5'8"

670mm wide

≈ 151mm thick · estimated

100litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Shorter and fuller than most. A round tail, a full nose and parallel rails.

derived · against the 61 other sup foil boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia X-Foil PRO 2023: every size as listed by JP Australia
size	length	width	thickness	weight
100 L	173 cm · 1730 mm	670 mm	≈ 151 mm · estimated	6.9 kg
110 L	186 cm · 1860 mm	700 mm	≈ 148 mm · estimated	7 kg
128 L	199 cm · 1990 mm	720 mm	≈ 156 mm · estimated	7.7 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the JP Australia X-Foil PRO 100 L over up to four others, at one scale.

Compare with…

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 100 L outline · derived

54 %wide point, 930 mm from the tail

2.52length over width

568mm wide 12″ from the tail

10,144cm² of planform

Read off the 110 L outline · derived

54 %wide point, 999 mm from the tail

2.66length over width

571mm wide 12″ from the tail

11,129cm² of planform

Read off the 128 L outline · derived

54 %wide point, 1069 mm from the tail

2.76length over width

580mm wide 12″ from the tail

12,247cm² of planform

Rocker of the 100 L · estimated

≈ 67 mmtail rocker, at the tip

≈ 16 mm12″ from the tail

≈ 26 mm12″ from the nose

≈ 125 mmnose rocker, at the tip

≈ 461 mmflat to within 3 mm, from 39 % to 65 % of the length

50 %of the length to the lowest point, from the tail

≈ 151 mmat its thickest, 54 % from the tail

≈ 50 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 110 L · scaled from the 100 L, estimated

≈ 73 mmtail rocker, at the tip

≈ 18 mm12″ from the tail

≈ 31 mm12″ from the nose

≈ 136 mmnose rocker, at the tip

≈ 484 mmflat to within 3 mm, from 39 % to 65 % of the length

50 %of the length to the lowest point, from the tail

≈ 148 mmat its thickest, 54 % from the tail

≈ 54 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 128 L · scaled from the 100 L, estimated

≈ 78 mmtail rocker, at the tip

≈ 20 mm12″ from the tail

≈ 37 mm12″ from the nose

≈ 146 mmnose rocker, at the tip

≈ 494 mmflat to within 3 mm, from 40 % to 65 % of the length

50 %of the length to the lowest point, from the tail

≈ 156 mmat its thickest, 54 % from the tail

≈ 58 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · On JP Australia's photo of the 100 L, where its traced side holds 23 % more than the listed 100 L: probably shot from slightly above. Tail end set by Claude, not checked by a person. · estimated