JP Australia, 2023

X-Foil IPR 2023

1860mm long · 6'1"

700mm wide

≈ 147mm thick · medium confidence

110litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

A fuller nose than most. A round tail, a full nose and parallel rails.

derived · against the 61 other sup foil boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia X-Foil IPR 2023: every size as listed by JP Australia
size	length	width	thickness	weight
100 L	173 cm · 1730 mm	670 mm	≈ 150 mm · estimated	7.9 kg
110 L	186 cm · 1860 mm	700 mm	147 mm · medium confidence	8.3 kg
128 L	199 cm · 1990 mm	720 mm	≈ 155 mm · estimated	9 kg
158 L	213,5 cm · 2135 mm	790 mm	≈ 163 mm · estimated	10.3 kg

Every size side by side, tails on one line, one scale

Next to your board?

Lay the JP Australia X-Foil IPR 110 L over up to four others, at one scale.

Compare with…

Generations

After it · 2024

The 2024 158 L is the same length and width as the 2023 158 L; its wide point moved 12 mm toward the tail. Open the 2024

listed length and width · wide point derived

2023 158 L 2024 158 L

The JP Australia X-Foil IPR over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

Read off the 100 L outline · derived

55 %wide point, 945 mm from the tail

2.58length over width

554mm wide 12″ from the tail

9,927cm² of planform

Read off the 110 L outline · derived

55 %wide point, 1016 mm from the tail

2.65length over width

573mm wide 12″ from the tail

11,178cm² of planform

Read off the 128 L outline · derived

55 %wide point, 1086 mm from the tail

2.76length over width

581mm wide 12″ from the tail

12,271cm² of planform

Read off the 158 L outline · derived

55 %wide point, 1166 mm from the tail

2.70length over width

629mm wide 12″ from the tail

14,445cm² of planform

Rocker of the 100 L · scaled from the 110 L measured

66 mmtail rocker, at the tip

9 mm12″ from the tail

30 mm12″ from the nose

128 mmnose rocker, at the tip

513 mmflat to within 3 mm, from 30 % to 60 % of the length

39 %of the length to the lowest point, from the tail

150 mmat its thickest, 54 % from the tail

59 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 110 L · measured

71 mmtail rocker, at the tip

10 mm12″ from the tail

36 mm12″ from the nose

139 mmnose rocker, at the tip

512 mmflat to within 3 mm, from 32 % to 59 % of the length

39 %of the length to the lowest point, from the tail

147 mmat its thickest, 54 % from the tail

64 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 128 L · scaled from the 110 L measured

76 mmtail rocker, at the tip

11 mm12″ from the tail

41 mm12″ from the nose

149 mmnose rocker, at the tip

536 mmflat to within 3 mm, from 32 % to 59 % of the length

39 %of the length to the lowest point, from the tail

155 mmat its thickest, 54 % from the tail

68 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 158 L · scaled from the 110 L measured

82 mmtail rocker, at the tip

13 mm12″ from the tail

48 mm12″ from the nose

161 mmnose rocker, at the tip

562 mmflat to within 3 mm, from 32 % to 59 % of the length

39 %of the length to the lowest point, from the tail

163 mmat its thickest, 54 % from the tail

73 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · Measured on JP Australia's photo of the 110 L. Tail end set by Claude, not checked by a person.