Wing foil

JP Australia, 2021

X-Winger 2021

1680mm long · 5'6"

710mm wide

118mm thick

105litres

Open in Studio See it on jp-australia.com

Sizes & Numbers

Listed by the brand, read off a photo, or worked out: where every number comes from

In one line

Shorter and fuller than most. A round tail, a full nose and parallel rails.

derived · against the 225 other wing foil boards in the atlas, read off the outlines.

As listed by JP Australia

JP Australia X-Winger 2021: every size as listed by JP Australia
sizelengthwidththicknessweight
75 L133 cm · 1330 mm660 mm112 mm5.7–6.2 kg
95 L152 cm · 1520 mm690 mm121 mm6.5–7 kg
105 L168 cm · 1680 mm710 mm118 mm6.8–8.2 kg
125 L183 cm · 1830 mm750 mm117 mm7.5–8.4 kg
145 L198 cm · 1980 mm790 mm120 mm8.2–9.2 kg

Every size side by side, tails on one line, one scale

198013300 mm133075 L660 w152095 L690 w1680105 L742 w1830125 L750 w1980145 L790 w

Next to your board?

Lay the JP Australia X-Winger 105 L over up to four others, at one scale.

Compare with…

Generations

After it · 2022

The 2022 60 L is 51 mm narrower than the 2021 75 L, same length; its wide point moved 25 mm toward the nose. Open the 2022

listed length and width · wide point derived

2021 75 L over the 2022 60 L, tails aligned, one scale
2021 75 L 2022 60 L

The JP Australia X-Winger over time

Shape & Rocker

From above, then from the side, true scale · the chosen size solid, the others dashed

JP Australia X-Winger 2021 from above and from the side, every size at true scale, tails aligned
JP Australia X-Winger 2021 from the side, true proportions: the bottom's rocker over a flat table, every size; borrowed (≈), drawn hollow

Read off the 75 L outline · derived

52 %wide point, 696 mm from the tail

2.02length over width

579mm wide 12″ from the tail

7,553cm² of planform

Read off the 95 L outline · derived

52 %wide point, 796 mm from the tail

2.20length over width

591mm wide 12″ from the tail

9,024cm² of planform

Read off the 105 L outline · derived

52 %wide point, 880 mm from the tail

2.26length over width

623mm wide 12″ from the tail

10,729cm² of planform

Read off the 125 L outline · derived

52 %wide point, 958 mm from the tail

2.44length over width

619mm wide 12″ from the tail

11,810cm² of planform

Read off the 145 L outline · derived

52 %wide point, 1037 mm from the tail

2.51length over width

643mm wide 12″ from the tail

13,459cm² of planform

Rocker of the 75 L · scaled from the 105 L, borrowed (≈), estimated

≈ 32 mmtail rocker, at the tip
≈ 6 mm12″ from the tail
≈ 15 mm12″ from the nose
≈ 91 mmnose rocker, at the tip
≈ 417 mmflat to within 3 mm, from 32 % to 63 % of the length
50 %of the length to the lowest point, from the tail
≈ 112 mmat its thickest, 52 % from the tail
≈ 31 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 95 L · scaled from the 105 L, borrowed (≈), estimated

≈ 38 mmtail rocker, at the tip
≈ 8 mm12″ from the tail
≈ 22 mm12″ from the nose
≈ 105 mmnose rocker, at the tip
≈ 442 mmflat to within 3 mm, from 33 % to 62 % of the length
50 %of the length to the lowest point, from the tail
≈ 121 mmat its thickest, 52 % from the tail
≈ 36 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 105 L · borrowed (≈), estimated

≈ 43 mmtail rocker, at the tip
≈ 10 mm12″ from the tail
≈ 29 mm12″ from the nose
≈ 117 mmnose rocker, at the tip
≈ 459 mmflat to within 3 mm, from 35 % to 62 % of the length
50 %of the length to the lowest point, from the tail
≈ 118 mmat its thickest, 52 % from the tail
≈ 40 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 125 L · scaled from the 105 L, borrowed (≈), estimated

≈ 48 mmtail rocker, at the tip
≈ 11 mm12″ from the tail
≈ 36 mm12″ from the nose
≈ 129 mmnose rocker, at the tip
≈ 478 mmflat to within 3 mm, from 35 % to 61 % of the length
50 %of the length to the lowest point, from the tail
≈ 117 mmat its thickest, 52 % from the tail
≈ 43 mmlonger along the bottom curve than flat

Lay this rocker over other boards

Rocker of the 145 L · scaled from the 105 L, borrowed (≈), estimated

≈ 53 mmtail rocker, at the tip
≈ 13 mm12″ from the tail
≈ 43 mm12″ from the nose
≈ 140 mmnose rocker, at the tip
≈ 497 mmflat to within 3 mm, from 36 % to 61 % of the length
50 %of the length to the lowest point, from the tail
≈ 120 mmat its thickest, 52 % from the tail
≈ 47 mmlonger along the bottom curve than flat

Lay this rocker over other boards

True proportions · dots at 10 mm and 12″ in from each tip · bracket: flat to within 3 mm · drawn hollow: no usable side photo of this board · shaded: the middle 80 % of its group · No usable side photo of this board: the median of 103 hard wing boards from 67 product lines. Tail ends set by rule, Claude or a brand convention on their photos, none checked by a person. · estimated

Reviews & Videos

Original pages · 1

Similar Boards

Closest outlines from other models, once stretched to one length and width · derived